How to propagate the ficus large

The reproduction of the ficus at home is the process simple.

How to propagate the ficus large

Several ficus reproduction tips at home

The reproduction of the ficus at home is the process simple.

It is only important to adhere to the recommendations of experienced flowerflowers.

Methods of breeding ficus

What and how to propagate the ficus at home? There are several ways to breed this popular at the flower-lovers of the plant.

Cherenkovania

How to smear ficus? For reproduction cuts up the upper cutlets. This method is suitable for deciduous types of ficus.

This is done in the spring when the plant begins in growth after the winter period of peace (how to help the ficus to survive winter?). The cutlets are cut with a sharp knife. Select an instance with two interstices.

After cutting, the cuttings put in water. It is necessary in order to stack Milky Juice. After a few hours, the workpiece dried.

For better formation of the roots, the cut is treated with drugs stimulating the root formation (corneser, heteroacexin).

Further formation of roots can be carried out in two ways:

    Put the stalks in the dishes, at the bottom of which was laid wet wool.

Previously in water dissolve the tablet of activated carbon. The roots on the workpiece germinate 4 weeks later. To root a stalk in a mixture of peat and sand. Scroll is treated with charcoal.

The cuttings are covered with a transparent cap and kept in a warm place, periodically watering and sprinkling the stalk. Large varieties spread the cuttings not only from the tops.

Side and lower shoots are suitable for these purposes.

How to make a ficus give side shoots? To get lateral shoots, you need to trigger the ficus in a timely manner.

In the spring, cut the top with three leaves and root it.

Scroll be sure to wood coal. Soon below the slice will begin to grow lateral processes.

They are separated from the stem, cut into steels with a pair of kidneys. At the same time, the upper cut is made above the kidney of a leaf sinus, lower - under the interstilius.

From sheet

A sheet of good quality is cut as a material.

The cut is impregnated with a stimulant of the root formation and is placed in warm water or as in the case of stalling in the dishes with cotton.

You can immediately plan the sheet into the substrate and cover with a glass cap.

Pre-cut sheet twisted with a tube and dried.

Useful videos: Ficus reproduction from sheet

Air and horizontal chains

Air chains (processes) - shoots with formed roots. They are formed on the tree of large ficuses. How to get the proceeding from the ficus?

Return from the top of the stem of about 60-70 centimeters and remove the leaves and shoots from this place.

On the resulting plot length 15 centimeters Make slots About 1.5 centimeters At a distance of each other in 3-4 centimeters.

Moisten the cuts with the root former and sow wet moss.

On top of the moss, fasten the film using a rope.

Moisturize moss with a syringe.

As soon as the roots are shown, cut the stem at the place where they were formed, and put in a pot (all useful information about the landing of the ficus can be found here).

Among the ficuses there are species with fluttering stems. They can be multiplied by the way horizontal melting.

The lower escape is liberated from the leaves, make small grooves on it, bend and fix in the ground.

Undriges are processed by the root formation stimulant. As soon as the glasses give roots, it is separated from the maternal stem and plant separately.

Seeds

Ficus seeds can be obtained at home is impossible, because insects need insects - pollinators.

Inexperienced flowers take bizarre berries-inflorescences for seeds.

You can purchase seeds of ficus for its cultivation in retail chains.

Before sowing, they are treated with fungicide, and then a growth stimulator.

For sowing prepare a mixture of sphagnum and peat. You can mix the humus (2 parts) and sand (1 part).

Pre-prepared substrate sterilize ferry.

For sowing take a flat wide container with drainage holes.

Before falling asleep soil, the container is treated with a disinfecting composition and washed.

The soil is poured into the vessel, slightly adjusted it and moisturize the spraying method. Seeds lay out on the prepared surface.

Sowing slightly suck with fine soil, cover with glass. Put the capacitance into a light warm place with a temperature Not less than 22-23 degrees.

Do not allow the sowing of straight rays of the sun, they "boil" and die. The dishes are regularly moisturized and ventilated. The overvailing is not allowed.

As soon as the first shoots appear, the glass must be lifted, putting on it wooden backups.

Across 3-4 days When shooting should be harvested and get used to the outdoor, the cover is removed.

How to send ficus searches at home? Seared sediments after formation on them 4 leaves. Sprouts follow At a distance of 4-5 centimeters.

The roots are preliminarily cut. Saplings deepen into the soil to the first leaflets.

A feature of the ficus sprout is the need for frequent transplant, so they are transplanted Several times for 8 weeks. It helps to develop the root system.

Two months later, the sprouts are feeding with a special fertilizer for ficus.

Photo and video

The photo shows a ficus process:

General recommendations on how to propagate a ficus at home:

  1. Procedure spend in spring or summer.
  2. Do not place young, just rooted the processed processes under the sun, as they do not tolerate ultraviolet.
  3. Rinse the cut slicer of the cutter. Additionally, dry the slice before rooting.
  4. Do not take young shoots for overlap, only weeds are suitable.

Compliance with the reproduction of fakes will help you get new copies to decorate the interior of your home.

Useful video on the topic:

If you have found a mistake, please select the text fragment and click Ctrl + Enter. .

Methods of propagation of rubbing ficus

Ficus rubbing or elastic - common decorative and deciduous room plant. Its basic value is spectacular glossy leaves and inconspicuous to growing conditions.

One of the most simple ways to produce young plants is the reproduction of a rubber ficus with leaves. This culture has no pronounced rest period, so the procedure can be carried out throughout the year.

Description of plants and conditions of cultivation

Ficus rubbing - one of the most common types in bedroom flowering. According to popular beliefs, he brings family well-being to the house. The birthplace of this plant is India and the southern part of Indonesia. In natural conditions, elastic - a large evergreen tree height of about 30 m.

Ficus rubbing is characterized by large leathery leaves of elliptical shape of a rich green color. Young leaves can have a small reddish tint. In room conditions, elastics practically does not bloom.

Milky juice of this plant has a rather strong irritant effect and under certain conditions can lead to strong allergic reactions or dermatitis. Once this species was grown on an industrial scale in order to obtain rubber.

When placing elastics in the room, preference should be given well-lit places, but without the presence of direct sunlight. With a slight shading, he continues to develop, but its growth rates are significantly reduced.

With a long lack of illumination, the barrel of the plant is strongly stretched, and the shoots are taken off. To avoid this, in the winter period, the temperature is reduced to 15-16 ° C and reduce the volume of irrigation to a minimum.

Due to the popularity of this plant, its major copies are quite expensive. But do not be upset if there is no financial opportunity for its acquisition. It is possible to grow a beautiful large plant and with your own hands, especially if you know how to propagate a rubbing ficus in room conditions.

Soil for growing elastics should be fertile and loose. It is best for him to purchase a finished substrate for growing ficuses. It can also be possible to make a self-mixing of the peat soil of universal destination with the turf, humus and sand in equal proportions.

Reproduction with leaves at home

To grow a young plant of elastics, it is enough to get his sheet with a small piece of interstilia. Perhaps someone from acquaintances or colleagues at work will simply share the landing material. The percentage of rooting in leaf cuttings is quite high.

Attention! Inexperienced flowerflowers are very often trying to root the individual leaves without kidney. The rooting in this case occurs, but the sheet itself does not touch the growth. This is due to the lack of growth point, because it is she who after rooting the sheet gives life a new plant

Any plastic container is suitable for landing sheet. At its bottom, a layer of drainage from clay or foaming is necessarily stacked, and openings are made in the bottom of excessive water.

Soil for planting must necessarily be loose. For example, for these purposes a universal substrate is well suited for growing indoor plants, mixed with vermiculite. Strongly block the cuttings when landing should not. His kidney must be over the surface of the soil. For stability, the stalks can be knocked out with a toothpick, any wooden or plastic wand.

Attention! Elastics is thick milky juice, so the planting material should be thoroughly rinsed in running water. If this is not done, the rooting process lasts much longer.

After landing, the container is well watering. A plastic bag is put on top to it, which will create a greenhouse effect and speed up the rooting process. Under all conditions after 3-4 weeks, the cuttings give roots.

Video on how to grow ficus from the sheet.

Reproduction of ficus with top cuttings

Very often in the process of growing, the ficus is growing. Its barrel becomes too long and low-incredible. In this case, the forming trimming is carried out, after which the top cuttings remain, which are convenient to use for self-reproduction of the ficus.

To do this, you can use not only the tops themselves, but also the average parts of the shoots. But all the cuttings must comply with the following requirements:

  1. Being about 7-8 cm long.
  2. Have 2-3 interstices with well-developed leaves.
  3. The lower cut from them should be under the kidney itself.

To landing, the cuttings are prepared as follows:

  1. Immediately after cutting to remove the Milky Juice, they are washed in a large amount of warm running water.
  2. The sheet from the lower node is removed using a sharp knife.
  3. Large lower leaves are neatly twisted into the tube with the bottom side inside and fixed with a gum.

The cuttings prepared in this way are planted in a loose substrate. Shed closely obliquely. Blowing it is not more than one interstitial. Immediately after the end of the landing work, the container is well watered.

To speed up the root formation process, you can build a small primitive greenhouse from the cellophane package. Also on the growth rate of roots, the lower heating has a significant impact. If possible, the cutter with cuttings can be simply placed above the heating battery.

To root the planting material of elastics is in water. But this method is more used in the warm season during the period of intensive growth. For him, the cuttings are harvested and prepared as well as for the above methods.

After preliminary preparation, they are placed in a container with boiled dilated water. At its bottom to prevent the development of mining processes, you can put a small piece of charcoal.

During the rooting period, it is necessary to monitor and if necessary to add. Even short-term drying will lead to the death of root incarnations. After the appearance of the first roots, the planting material is planted into a loose substrate, and the cutter with cuttings is placed in a small greenhouse.

From more modern means for rooting the planting material, peat tablets can be used. They include special growth stimulants and root formation, which allow you to achieve almost 100% of the result.

The process of preparing the planting material for rooting in peat tablets is no different from the methods described above. Tablets themselves before planting need to soak in warm water. After they swell themselves cautiously pressing them.

In the center of the tablet, there is a small deepening, which then places escape. After landing, the tablets are placed in a suitable plastic container, preferably with a transparent lid. On sale you can find miniature plastic tubers specially adapted for these purposes. Further care of the planting material lies in periodic watering and ventilation.

Air chains

At home, it is possible to reproduce the ficus of the rubber and the help of air chains. To do this, usually choose a long blossomed escape, which can then be trimmed. On the site located above the sheet with a sharp knife, the vertical incision of the crust is made. A small piece of wood is inserted into it. Korenev powder. For example, for these purposes, you can use a match, toothpick or just a small chips.

After that, the place of the outbreak is placed with a layer of wet moss or sawdust. Then the polyethylene film is turned on top of it. Under the compliance with conditions after 1.5-2 months, it will be possible to see the first roots.

After the development of the root system, the escape is rooted in this way, it is cut off from the parent plant and planted into a separate container. With the help of melts, it is possible to implement not only the rejuvenation of the old copier of the fraud, but also its reproduction.

It is not difficult to grow a large copy of the rubber ficus at all. The main thing is to comply with the necessary shilling out technology and adhere to the recommendations on rooting.

tonature.info.

Directory of indoor plants

How to propagate a large ficus?

Simple methods of reproduction of large-scale ficus. Tell how to plant, than to close wounds, how to stimulate development. After reading, you can propagate the large-scale ficus.

How to propagate a large ficus?

Ficus rubcoming or large-scale came from Indonesia. You can enjoy the development of leaves and imagine yourself on the island of Java - a wonderful alternative to the landscape outside the window. So that such happiness in the house was more, you can get one more, two or more - at your discretion - ficuses.

How to propagate a large ficus:

  • Cuttings.
  • Sheet without a cutter.
  • Diggers.

Shining and leaf reproduction are fast and simple ways, but over the chains will have to work hard. The last method is almost a real surgery with careful care after, but about everything in order.

We breed ficus cinema

The cutlets are part of the green ficus stem with 1-2 sheets. Unlike the sheet method, there is a green escape that runs roots. In this case, the warranty of the extension is many times more.

Nuances trimming: the use of a pure, acute knife, without rust, organic residues treated in alcohol and dried before pruning

How to plant a large ficus :

  1. To deepen into the soil mixture by 5-7 cm.
  2. Do not immerse the lower kidney - leave above the surface.
  3. Set the temperature + 25 ° C and the humidity of 80%.

Important: Swells the cropped cutlets in the air so that the wound is dragged into the film, otherwise in the ground mixture it will take effect.

Plugging Ficus List - Landing Nuances

The sheet method of breeding a ficus is an option without a stalk. Naked leaf, contrary to fears of flower water, can also be multiplied. To do this, we carry out a similar pruning procedure, prepare the soil until the cutlets are tightened by the wreck, land in the soil mixture.

Alternative option: Gearing the sheet cutting in the water. It is necessary to form the roots, so we plunge the cuttings into a jar with a narrow neck, before the formation of the roots. Water periodically change, or add wood / activated carbon to prevent rot. To put in the soil mixture after the formation of the roots.

On a note : Gearing in the water pulls the landing procedure due to long-term root formation, but strengthens the sheet cutting and increases the chances of successful rooting.

Air chains - Is it hard to form?

Large-playing ficus gatherings are manually shaped shoots with roots on the main part of the plant. Choose a green twig, make a cut over the kidney, clean the juice that appears. Move the outstrap part, we take the moss with a sphagnum around the escape, over - polyethylene film, cellophane.

Nuances : The coating is not dense, so that air access remains. You can fix with a tape or tape and periodically removed. Moss sphagnum moisturize or change to fresh, wetted, so that the root formation occurs.

When the roots are formed : 3-3.5 weeks.

What to do next: Cut under roots and plant the resulting seedling in the soil mixture.

Stimulation of the root formation: a couple of epin droplets, "corneeling", or the use of cytokinin paste at the pruning area.

↓ Write in the comments, how did you multiply a large ficus?

Please rate the material read :)

How to propagate the ficus rubbing sheet at home

Reproduction of the top cuttings

In the process of cultivation, the barrel of the ficus is strongly pulled out and becomes minor.

    1. Trimming

      How to form a dense foliage in decorative ficus yourself?

      If you want you to crown your ficus look like a lush bush:

Fikuses are popular not only among hotel lovers. These unique plants are used to landscap the premises almost everywhere. A tree with small two-color or dark green leaves, with large lovid-like sheet plates - what only beauties will not meet in offices, apartments, rooms of rich mansions and small apartments. An adult decorative tree costs a lot, so many multiply ficuses independently.

Why do you need to breed a ficus?

These indoor flowers do magic properties. In some cultures, he is considered to be a faithful of family happiness capable of tie loving hearts forever. But more often they say that the ficus protects the house from evil and disease, brings good luck and fills the space with positive energy.

Foto-1-190.

Whatever it was, and the winter garden from evergreen small trees on the windowsill is capable not only to please the owners, but also:

  • Purify better other plants air from benzene impurities, as well as phenol and other harmful substances;
  • decontaminate. Its bactericidal and antiviral properties are known since ancient times;
  • Support immunity and anesthesia, remove inflammation in diseases of the joints, mucous membranes, as solutions for rinsing, rings and rubbing use tincture of leaves and young sprigs of home plants.

Feature! Take the tincture does not follow a doctor without recommendations, they can cause complications by the gastrointestinal tract, liver.

One plant, if it is good for it to care, can become a unique decoration of the room. But the flowerflowers have long noticed that it is worth appearing in the house with a tiny plant, as a nearby pot appears next to the other than his species, then - also.

The evergreen garden in the house amazes and delights all guests. They bring them down to give the village to relatives or relatives, decorate the hall or office, grow a new flower instead of the aged or dying from the disease.

Foto-2-186

Features of breeding depending on the type of flower

The variety of ficuses can hit the imagination. But it can create a number of problems for those who dream to create their own own garden in the apartment or in the country. After all, each plant requires an individual approach and has its own characteristics.

Flowers use many methods for breeding plants.

The most popular among them:

  • cuttings;
  • with the help of air regulations;
  • Rooting leaves.

The method is selected depending on the type and age of the mother tree.

Foto-3-197

How to plant a spool ficus process?

For breeding wide types of ficuses, the method of shilling and landing is best suited.

But the easiest way to send an adult plant during transplantation:

  1. During the day before moving the ficus to a new porridge, it must be poured.
  2. Shooting comers with the roots of an adult plant, carefully inspect the sprouts who have already crushed roots.
  3. Carefully separate them from the main root, trying to damage as much as possible.
  4. To plant a new plant in a nutritious soil prepared for it.
  5. Water with solid with additives facilitating rooting.
  6. Cover the glass can or polyethylene by creating greenhouse conditions.
  7. Every day to water, ventilated for 30 minutes.

Important! Both the parent plant and the new ficus need special care after a transplant, one should not touch the young (up to 3 years) a tree or a weakened plant.

Without a transplant, you can get a new flower, rooting the gag. To do this, repel the top of the ficus - a cutlength of 10 to 15 cm long, preferably semi-restned, process the cutting place by a disinfecting composition. The escape is placed in the nutrient solution until the roots appear, then planted into the ground.

Foto-4-192.

Some flowers take on the cuttings of the tank and from the middle of the trunk, but they should be at least 3 leaves. The tanks are also kept in the nutrient solution until the roots appear or planted immediately into the prepared soil, they are abundantly watered, the sheets are gently folded with the tube or cut to half, which helps reduce moisture consumption and increases the chances of the rapid appearance of new roots.

If everything is done correctly, a month later, young leaves will appear on the new tree.

How to reproduce Ficus Benjamin?

A beautiful green tree becomes a real decoration of any room, his dark green shiny leaves even in the frosty day resemble a hot summer, glading. The straight trunk, a thick crown, the abundance of foliage - and all this with a sufficiently small number of concerns. For this and love the flower ficus. It is enough just to know how to propagate the plant.

Foto-5-186

In the spring, Benjamin needs trimming, without which his crown can randomly grow up, giving a tree a neakkuratic look. Cuttings, abundant remaining after that, are used as a planting material.

  1. On a branch, a length of at least 10-15 cm, leave 3-5 upper leaves, the rest are neatly cut off.
  2. The cuttings are placed in the crown solution, any other nutrient mixture for accelerated root formation.
  3. The cutter with a cutter is left in a shaded, but not too dark place, with a constant temperature of about 23 degrees.
  4. After 2-3 weeks, when the stalk gives the first roots, the plant is placed in a specially prepared primer for ficuses and covered with a film or a can.
  5. Water abundantly, neatly, not giving the soil to dispel.
  6. Another 2-3 weeks, the plant gives new kidneys, and it means that it gothes.

Interesting! Dropped fully leaflets on a cutlery do not say that he died. So the plant is trying to preserve the nutrients necessary for the growth of the roots. Do not panic and get upset, the roots will appear in a few days.

How to root a tree ficus?

Robusta, Tineke, Belasts and other types of tree ficuses - rubberous trees, in the natural environment in a hot wet climate they grow up to gigantic sizes. These ficuses in Thailand, India consider the sacred, contributing to the preservation of the world in the family, relieve negative energy.

Transformed by breeders in decorative plants for landscaping apartments, these beauties still affect their power imagination. Huge leathery dense leaves, which are covered with wax, powerful stem, air chains help create chic green compositions from these plants.

Foto-6-190.

For reproduction, they take, as a rule, the top shoots.

Attention! Rubberos can damage the skin of the hands with their juice, cause burns, so it is necessary to work with them in gloves.

  1. The top of the adult plant is cut under the angle of a sharp tool, leaving up to 5 leaves on a cutken.
  2. Wash under the crane space of a cut with highlighted juice.
  3. Fill or cut to half leafy plates.
  4. It is placed in a nutrient solution, poured into an opaque container before the appearance of the roots.
  5. Transplant to the ground for further growth.

Sometimes shoots germinate in the sand, which is constantly moisturized, but it takes more time and does not make it possible to notice the appearance of roots.

How to breed a Bengal look?

One of the most interesting types, in nature, one tree may seem like a whole forest. And all thanks to the air roots that appear on the long branches are descending to the ground and germinate, turning into strong trunks. Flower, using this feature, create compositions from the air roots in the form of openwork patterns, braids, lattices.

Ficus Bengali can be diluted at home, reproducing not only with the help of air roots, separated in the soil, but also cuttings, seeds - after flowering, it appears similar to the berries of the fruits that feed birds. The flowering of these ficuses is a frequent phenomenon, so get seeds are quite real.

Foto-7-186

  1. Seeds are sown in a light peat soil in small tanks with sideboards about 5 cm in height.
  2. From above sprinkled with sand-peat soil (no more than 1 cm layer).
  3. Good moisturize.
  4. Close the container with glass or transparent film.
  5. They vent and water every 3-4 days.
  6. Seed shoots are waiting for up to 2 months.
  7. Capacity with sprouts put in a light warm place, waiting for the appearance of the first leafs, and then, after 3-4 months after the appearance of sprouts, transplanted into the pots.

The time consuming and requires constant attention to the process of fascinating for true connoisseurs, which observe the process of growth of the village from the first moments of its appearance.

We bring together this species and cuttings, germinating with a weathered side and elite shoots.

Breeding and landing of large-scale ficus

There are copies among the ficuses, affecting the size of the leaves. Some plates in length grow to half a meter, lovoid surprised by carved edges and veins, the drawing of which makes them similar to this musical instrument.

Foto-8-173

To multiply large ficuses can be seeds, although this is the most, perhaps an exotic and complex way. More often with cuttings, which are germinated and rooted, or roots on the air stalk, devoid of the bark, or planted with leaves.

  1. A large sheet with a stalk, on which there is a kidney, cut off with a sharp tool.
  2. Warm water from juice.
  3. Place into a toss with a row or other nutrient mixture.
  4. Cover with glass or film, making a "minibar".
  5. He exhaust within a month.

After the appearance of thin, fragile roots, the plant is planted in a small pot, filled with drainage and a mixture of peat, sand and a small amount of garden land. The plant is covered with a glass jar. Moisturize the soil, priest and watching the temperature to be constant and not lower than 23 degrees, are waiting for 3 months. When the ficus begins to grow, and the first leaves will appear on it, it can be planted in a more spacious container.

Important! It requires a good saturation of the earth with oxygen, so in the tanks there must be holes. Not only at the bottom, but also on the side.

When planting a leaf with a cutlets in the soil, the plant is not recommended to plunge: if the growth point is under the soil layer, the ficus will die. Neutral light soil, heat, constant careful moisturizing and watering root growth activators give good fruits.

Foto-9-155

Preparation for the procedure

It is necessary to seriously prepare for the creation of your own winter garden of fakes or just growing one more domestic handsome.

Unpretentious adult plants are not young shoots, to destroy that even an incorrect movement during the billet of the cuttings.

Ficuses are subject to diseases that develop due to the penetration of infection through damage to the sections of the cut, and the transplantation with the escape branch can destroy the sprout and the parent plant, which took care of more than a dozen years. So any flower water necessarily carefully prepares the tool, tanks for planting cuttings, pots and soil.

Foto-10-127

Required tools

In the arsenal of each lover of indoor flower growing, which has ficuses in his collection, must be:

  • A sharp knife, a secateur or scissors that are easy to separate parts of the plant;
  • Tassel for disinfection of the location of the cut;
  • powder made of wood ash, activated carbon for processing sections of cut;
  • garden var;
  • alcohol solution for disinfection of tools;
  • Fillet for a dressing on the cutting place;
  • Rubber gloves.

We need to take care of the place where work will be carried out. We need permanent access to water, spacious solid surface, good lighting. The flower should not interfere, so everything is cleaned with the work surface, leaving only a maternal plant and a pot of soil or nutritional solutions for sprouts.

Foto-11-89

Choosing a place

The procedure for reproduction of ficuses may be quite laborious and leaving behind a lot of garbage.

In order not to move the whole apartment, it follows:

  • Show table or other surface with film;
  • On the floor put the film or old newspapers;
  • take care of lighting;
  • Check whether everything you need should not be once again distracted.

The room should be spacious, especially if it is planned to transplanted the parent plant: roll the ficus, without waking up the soil, without shed water, it is not always possible. The creaked foliage, pieces of bark and cuttings, other garbage will be much easier to remove if the floor and the table are covered with a film.

Foto-12-74

Preparation Pot and Earth to Eat Flower

It is important to have properly prepared soil, the facilitated containers are correct - half of the success depends on it.

Well fits ceramics - high spacious vases with a wide riding. For young, germinated from the seed or leaf of plants, not very deep tanks, but for cuttings - opaque glasses or a rig.

  1. Pots must be new or carefully disinfected.
  2. Bottom and side openings are required.
  3. The soil is specially intended for ficuses or cooked independently made of mixed in equal parts of sand, peat and humus.
  4. Before boarding, it is recommended to rolling pots and the soil to get rid of pests.
  5. At the bottom of the tank, the ceramzite or other drainage, disgraced in advance.

It should be noted that unnecessarily spacious container can become a rampant infection, so that the sprouts are planted in a container with a diameter of about 10 cm. This is enough for the first year of life.

Foto-13-50

How to breed a plant at home?

Several favorite flowswear methods are verified in practice. Each of them has advantages and disadvantages, so that the flowers choose themselves how to use it.

Cherenca

It is easiest to breed ficuses, multiplying them with cuttings. Causes:

  1. Almost all kinds have a weed shoot, thickening the crown.
  2. The pinching of the top makes a fragment, helps to form a crown.
  3. The cuttings are much easier to take root and give roots.

It is enough to place a cut branch into a nutrient solution and wait about 2-3 weeks - and the new ficus has already entered the roots. In fact, everything is not so simple, but this method remains the most popular for many years.

Foto-14-37

Leaf

The leaflets are not able to root, but if he is the only one on a tiny cutter with the kidney, it is quite possible to grow another ficus.

  1. The leaf on the branch is lowered into the nutrient solution.
  2. Waiting for the appearance of the first roots (up to 1 cm).
  3. Sit into the sandy peat mixture.
  4. Shelter.

Watering and conducting, the plant is kept in greenhouse conditions until it goes 3 months and it does not touch growth.

Foto-15-27

Digging

Some kinds of ficuses will determine with air roots (glasses), helping them to root. The procedure is not easy, even in vivo, not all such gods survive.

  1. Having made an incision on such a gauge, it is placed in its strut (match, paper clip, etc.).
  2. Then filled with peat and sawdust polyethylene package.
  3. Take it around the location of the cut, carefully fastened from both sides.
  4. After 14-20 days, the grooves the roots, it is cut and neatly moved to the container with the soil.

Experienced flower products use this method, but it is not always given and not always.

When transplanting adult plants, you can often find the already rooted young chain near the main root. Separate such a plant and put into the ground much easier. Almost always the plant is doing well.

Foto-16-20.

Seeds

The most rare method of breeding ficuses - seeds. Very rarely, these trees bloom at home. And even bloom does not guarantee that the seeds are viable, as pollination is even more difficult to achieve than the appearance of colors.

But some types of ficuses bloom and even fruit: red, similar to berries Fruits contain plant seeds.

  1. Seeding seeds in moistled sand takes about 2 months.
  2. Crumbling sprouts are gaining moment about a month.
  3. Only after that they can be translated from sand into the ground.

The fact that in nature is quite natural, at home looks almost impossible. Many sprouts perish in the first weeks, some cannot be rooted. But how happy the success pleases, if it turns out a magnificent fountain with huge leaves from the seed, wet shining in the sun.

Foto-17-17

How to choose a big ficus step by step?

In order to dissipate an adult plant, you need to prepare a place in advance. A new capacity and soil will be required for the parent plant, as well as the container and soil for the sprout.

  1. A few hours before the transplant is good to shed a plant.
  2. At the bottom of the pots, pour drainage - to a third of the total volume.
  3. Carefully put the ficus side, "roll out" roots with the ground.
  4. Remove excess soil.
  5. Separate sprouts with roots, trying to injure as little as possible.
  6. In the prepared pots, pour soil, leaving about a third of the volume is empty.
  7. Plant a plant with roots in the ground.
  8. Sleep the soil, compact.
  9. Purchase from above peat-sand mixture.

A young sprout rooted approximately, if necessary, put the support to which the plant is tied.

Foto-18-12.

Nuances of the procedure

It is necessary to act very carefully, because many ficks hardly tolerate even the change in lighting, they are easily discharged by the foliage, have fragile branches. And the less damage, the easier the plant will reconcile after the transplant.

It should be remembered that:

  • It is necessary to be taken for reproduction of ficuses in spring when the growing period begins;
  • It is best to start the procedure in the evening to have time to move the plant to the shaded place to the bright sun;
  • Young sprouts are poorly tolerant of drafts and temperature differences, so you need to choose a suitable place for them in advance.

The subtleties of watering, feeding, timely ventilation are important for the formation of roots and the first leaves - all this needs to be considered.

Foto-19-11

Is it possible to germinate a broken branch?

A twig, accidentally slammed, may well give root. But only if the escape:

  • not too young;
  • not subject to rotting;
  • It has more 3-leaves;
  • there is a kidney;
  • It is in a timely manner in Korniner or another activator.

The broken twig is released from excess foliage, make a slant cut and placed in a container with an activator.

Foto-20-10.

What to do if the twig does not give roots in the water?

Very often, the flowerflowers throw out cuttings, not giving roots in the water.

How can I fix the case:

  1. Turning out a stalk, make sure that it is alive (does not break, the bark is juicy).
  2. A little higher to make another one, but at an angle, removing up to 0.5 mm.
  3. Pour the activator into the container.
  4. Place a stalk there.
  5. Cover with transparent film.
  6. Place in a warm place without draft.

This should well stimulate the formation of the roots and their abundance.

Foto-21-7

Is it possible to plant a sprout without a root?

Many flower plates plant cuttings straight into the ground.

  1. Sand with peat and humus - Excellent substrate for germination.
  2. Greenhouse conditions will facilitate courtesy.
  3. Continuous moisturizing and feeding will give an additional chance to early germination of the roots.

Such plants, having grown, grow healthier, because they are immediately rooted in the ground, rich in vitamins, organic, minerals.

Foto-22-6

Gardener Tips, how to transplant ficus

Many lovers willingly share their experience in various forums. Their advice tested in practice can help beginner flowers.

You can use one of the techniques:

  1. Many are recommended when prompting leaves to turn the sheet into the tube around the pencil and taking the thread so that the sheet does not damage.
  2. There is an opinion that disseminated ficuses is best after 5 years.
  3. The dropout of stuffing in peat pots is much more practical, as the transplant procedure itself passes almost painlessly.
  4. Reproduction by air roots - the most acceptable method for rejuvenating the plant, which lost to the former beauty.

These and many other recommendations help properly multiply fake, creating beautiful green areas in the premises of schools, offices, rest centers and apartments.

The reproduction of the ficus at home is good and not simple. It all depends on the type of ficus and selecting the method of reproduction. Reproduction of ficus

Regardless of the type and variety of ficus, its presence in the house is always a luxury of greenery and a piece of nature at home. Depending on the variety, there are very colorful and Peppercut forms of ficuses . The reproduction of the ficus is a whole process in which you need to know and perform all the conditions and processes. Reproduction of ficus

Ficus reproduction, methods

You will need to choose a breeding method: shilling, with decodes, through a sheet. You can of course try to multiply the ficus seeds, but it is so long the process, the reproduction of the ficus by seeds, can be more difficult than in other ways. As mentioned above, depending on the type of ficus and its form of growth, choose the method of breeding we need. Many use the reproduction of ficus with cuttings, as well as other breeding methods that we consider below. Reproduction of ficus

Division of the main bush

This method is very simple, usually when you transplant the ficus, and do it better in the spring time when the plant wakes up and enters the phase of active growth and development. When you transplant the ficus, you take a plant from the pot. Before transferring it to a new pot, a plant should be inspecting for damage and new young shoots. They usually go out of the root and are located near the main plant. This method is well suited for breeding a dwarf ficus (poumpy) and sometimes for a fraction of rubber. Especially when the plants are still young and not formed in one barrel.

How to propagate the ficus largest and other ficuses when dividing the main bush, read further.

Gently should be separated by a young plant and land it into a separate container or pot. The main plant we plant in a new pot. We care for the main plant after the transplant and for the new one. Both need good care, as Ficus moved stress. Therefore, new shoots or the growth of existing, may be observed a few weeks later.

Reproduction of ficus by air vessels

We can properly multiply the amply or curly type of ficus (the poump). As for other types of ficus, this method of reproduction can also be used. To do this, you need to choose the desired escape and shop in the same pot. If the escape is long and well bend, it can be shopped and fixed in a separate pot, which will be close to the main pot with ficus. Escape should be fixed in the ground. As soon as the time after time, this escape forms the roots - it can be cut off from the parent plant. Reproduction of ficus

You can also use another way: for this you need to choose the desired stalk in the plant. And we will breed it with air chain. We make an incision on shoot. Juice that will go after the end - must be removed with a napkin. We also determine the height of the end. Usually this method is used when the ficus is rejuvenated, which for some reason has lost decorative appearance. Reproduction of ficus

In the selected place, we remove the leaves, the slice should not be deep and not too long. In the incision, try carefully to insert a sliver or a piece of toothpicks. It will not give the plant to tighten the cut. Circuit location process the root formation stimulator. Next, the place is wrapped with wet moss (you can use sphagnum). The place should be wrapped with a film or package and fix. So that he did not fall and did not leave.

We use scotch or rope, but we try not to drag it badly. This may disrupt the deploration in the main escape, on which we carry out a method of reproduction. Allow the moss to dry up is not allowed, so we will be moisturized in one place. This place, the upper part, so we will sometimes have to open the film and moisturize an additional moss. A month later, roots will be formed on the cut. It should be waited when there will be enough. Reproduction of ficus

After that, we cut off the escape and land at a permanent place in a separate pot. We make careful care for new escape. He also requires increased humidity and a lot of light and heat.

Reproduction of ficus with top cuttings

This is a fairly proven and the most popular way of reproduction. You need to choose the escape that you will use for breeding. It should be well developed and without signs of illness. Reproduction of ficus

In order to make a good slice, you may need special tools. It can be a sharp knife or a secateur. The tool must be definitive. Otherwise, it is possible to affect the infection both on the main plant and in the shoot of the shilling.

The cut should be made under 45 degrees. Long escape can be centimeters twenty, but at least ten. It all depends on the presence of sleeping kidney on the cutting tree and on what distance they are. The main escape of the ficus is suitable for the shilling, and the side. Especially if your ficus crushes and when forming trimming - you have a few shoots that can be used in reproduction. Reproduction of ficus

Inspect the cuttings, for its bark to be a whole and without signs of damage. If you wish, you can shorten the cuttings or divide it into several parts.

Next, we take a container with water, it should be room temperature and we put our cuttings into it. Water in a glass or a jar - change regularly, it will not give her the opportunity to shave. In order not to have the possibility of cuttings, it is possible to add crushed tablets into water (activated carbon). Capacity for cuttings (if it is a bank) need to wrap something dark, or use a dark container. Reproduction of ficus

It is necessary so that the water does not start blooming during bright light. If you have gotten very short cuttings. They can be fixed at the edge of the container. You can use a circle of paper or cardboard. We definitely break the lower leaves from the cuttings, and in general we try to ensure that the remaining leaves do not touch the water. In the water should be exclusively the lower part of the escape / stalk.

We put the cutter with cuttings into a warm and bright place. A straight sun should not fall on the cuttings, but the place should be well lit. If the evaporation of moisture begins in your container. Water can be addressed to the desired level. Either replace it completely. Reproduction of ficus

You can use cuttings for breeding immediately into the ground. For this, just take the container in which we will root our cuttings. We use a mixture of peat and sand, for better rooting, the ends of the cuttings can be treated with root formation stimulants.

In the prepared ground, just stick the cuttings. But in this case, you will need to use a greenhouse. It can be made from a plastic bag or plastic bottle. This is necessary in order to maintain a permanent humidity.

Ficks do not quickly give roots, so get ready to wait a few weeks. If you used a water container, then determine whether there are roots on cuttings - you can only explore the cuttings. When the roots appear - we take a cutting and planted on a permanent place, in the desired size of the pot. But when using cuttings of the ficus and its rooting in the soil - here we look at the appearance of new leaves on the cuttings. Reproduction of ficus

As soon as new leaves go - cuttings can be reset. But my advice is such - use a separate pot on every cutlets, or use peat pots. It is necessary for the transplantation to a permanent place - you are minimally injured so young roots. Than if you landed a few cuttings in one pot.

Breeding ficus with stalks

When multiplying the ficus in this way, ficuses with large leaves are mainly multiplied. This is a good way to use a part of the stem, on which there is either a sheet, or several kidneys, which will later become shoots. If you take a large stem, then it can be divided into several parts and use in reproduction. Reproduction of ficus

This method is good if you decide to cut or rejuvenate your ficus, or accidentally it happened that the escape is broken. We take the right stem, which we will breed. It can be divided into several parts. Everyone's length should not exceed five centimeters. And on each piece of escape should be sleeping kidney or leaf.

This method of breeding is used immediately landing in prepared capacity and soil. Soil is used normal or prepares a mixture of peat and sand. Be sure to add perlit / vermiculite. For good rooting, the soil can be displaced. Either use special preparations. Either it can be calcined in the oven (especially for the garden land or soil from the street). If there is a sheet on your cutter, it must be twisted into the tube. It will not give a sheet strongly evaporate moisture and take nutrients from escape. If there is no sheet, then we leave the cuttings - as it is. In both cases, you should provide good humidity. Therefore, we make a greenhouse from a package or plastic bottle. Reproduction of ficus

For this fashion model - you need to choose an adult escape that is well developed and fully worn.

Ficus reproduction by seeds

This method is used in the presence of crushing ficus seeds. No matter how they got to you. Have you bought them at an exhibition or in a specialized store. Or you presented them with friends. Seeds can multiply ficuses that have passed the flowering and aging of seeds. Unfortunately, at home, ficuses do not bloom, but in their homeland in natural conditions they bloom.

Seeds before landing should be prepared. To do this, make them a day in water, adding a growth stimulator into it. We take the finished soil, which can also be purchased in the store and add sand into it. Seeds before planting - should be rinsed with running water. Capacity for growing seeds is better to choose not deep and rectangular shape. It is necessary that the seeds sprout and gave shoots. Next, we will transfer them to other pots. The container for the germination of seeds should be good drainage. This will prevent the moisture stagnation and will give the opportunity to avoid picking seeds. Reproduction of ficus

Fill the tank with the soil and if the seeds are quite large - you can make a fossa for landing, but not deep. If the seeds are small, then we sow them superficially. We sprinkle on top of the soil or coarse sand. It is not necessary to water - it's just good enough to irrigate the tank made of the sprayer. Next, it is necessary to take care of constant humidity and temperature. Hold the tank in warm and bright place. As soon as the seeds are sprouting, waiting for two three leaves and can be resettled to a permanent place in separate pots.

Ficus reproduction sheet

To do this, use a good and healthy leaf. The tip where there was a cut - you need to handle the stimulant and can be put into water (more similar to the reproduction method with cuttings) or you can immediately put in the prepared container with the soil. When landing immediately in the ground, the sheet must be collapsed with a tube and slightly dry. Reproduction of ficus

After sitting on it into the ground and cover the package or plastic bottle. Hold on a light and warm place. Periodically, you can take a bottle for a while. It will give the opportunity to ventilate the sheet and prevent it off. But it is better to use a bottle, cut off the bottom, while leaving the top with the lid. Cover our ficus, and to control and saturate our ficus sheet with oxygen - just open the lid at the bottle. Reproduction of ficus

Summing up, we can say that almost all ficuses can be multiplied at home. Something is more difficult than something easier. When using the extension method - you can reproduce almost any kind of ficus.

When using the method of reproduction with tanks or rooting escape - it is best for empty ficuses, such as Ficus a dwarf (poump) or for other ficuses, if it allows to root the escape and tilt it to the ground. Sheet is better to multiply the ficus rubbing, it has a leather leaf and it is better suitable for breeding sheet. Good luck to you.

Stars: 1.Stars: 2.Stars: 3.Stars: 4.Stars: 5.

(

1

estimates, average:

5.00.

out of 5)

Loading...

How to reproduce Ficus Large at home: Main ways

Ficus is one of the most common houseplants that can be met not only in homes and apartments, but also in office space. It is obliged to be so popular with its unsurpassed decorative characteristics, as well as unpretentious in care. About how to propagate a large ficus at home, read in our article. In addition, here you also find a lot of useful information that concerns flower care.

Several important nuances

Decided to dilute the ficus at home? Then you most likely know that most plants are multiplied by three ways: stalling, decodes and with the help of seeds. Immediately it is worth noting that the last way it makes sense to spend only if you are a professional breeder. But all other techniques will simply show an excellent result. But only a number of certain nuances should be taken into account before reproduction.

Ficus growing on Street.
  1. Season. It is strongly recommended to conduct a reproduction procedure exclusively in the warm season. May and August are considered ideal months. However, if you decide to multiply Ficus in June or July, then your idea is most likely to be crowned with success. But in winter or late autumn, the plant is better not to disturb. Even if you manage to multiply the ficus, the process will often be sick and in general look weak.
  2. Sun protection. Young processes extremely negatively belong to the straight sunshine, so it will have to do in the northern room, where the risk of burning burns to the leaves will be minimal. If such an option is not possible, then be sure to use the shading. This can be done with a dense tissue or a special garden grid, the percentage of shading is 60%.
  3. Clean and sterility. As soon as your processes give the first roots, you will have to transplant them into individual pots, pre-processing the stimpler with the root formation. However, all the tools used must be clean and sterile. The same applies to the process of harvesting the planting material. Be sure to handle scissors or a secator in an alcoholic solution or manganese.
  4. Watering. During the first days after the transplantation of a young cutter in a separate container will have to use only warm and dilated water. It is best to give preference to that giving fluid that is collected after the rain. Well, or as an alternative, water is filtered by coal. However, in any case, it must first purchase a soft structure, standing 2-3 days before it can be used for irrigation.

And these are only the main nuances that relate to the breeding of the ficus with a sheet or cuttings. Also, experienced gardeners give quite a lot of useful tips on how best to carry out one or another procedure. In the following sections, you will find more detailed information about this. In addition, they will also provide a detailed algorithm of actions, which must be followed in order for the reproduction to be successful.

Shining ficus (without leaf)

How to propagate a ficus at home? Step by step about this will tell you the instruction, which is shown slightly below. However, it is necessary to note that it is most important to complete the cuttings. To do this, it is necessary to use a sharp knife pre-treated in an alcohol solution. If you disseminate this important rule, even the complete compliance with the described algorithm does not guarantee a good result.

Contaminated ficus.
  1. We prepare the soil. To do this, you can buy an already ready-made land in the supermarket or try to prepare it yourself, mixing in equal proportions of the turf and leafy land of the same structure.
  2. We prepare the pot. You should not use too large capacity, because it will not lead to anything good. It is best to give preference to pots, the diameter of which ranges from 9 to 12 centimeters.
  3. I fill on the bottom of the drainage layer. It is necessary so that the roots of the plant do not have a deficit in oxygen. As a drainage, you can use broken brick or fine pebbles.
  4. We prepare a stalk to the landing. To do this, you will need to remove all the leaves from it, so that the flower did not spend the strength on their development, as well as process the lower part of the root formation.
  5. Sale cutlets. First we make a slight deepening in the substrate, after which we put a stalk into it. For the formation of a greenhouse effect, it is recommended to cover the pot from above with a package or a bark itself.

As a landing material, it is strongly recommended to choose the elderly branches that have already been wounded. Otherwise, rooting may not happen, because the roots will grow very small and become quick to heat. Although, when observing the optimal regime of watering, it will be easier to avoid such a situation. In the next section, you will find the rules for the care of a young plant grown from the cutter.

Care for a cutlets in the first weeks

Now you know how to breed a large ficus with cuttings without leaves. However, it is worth understanding that the process of rooting the cutting in the soil is quite long, even if you previously treated the lower surface of the root formation. As a rule, the first roots will begin to appear in a week, however, with particular confidence to argue that the plant has taken root, it is possible only after 4 weeks.

Little fountain in hands.

The main task of the flower plant during this period is the observance of optimal conditions for growth. In 90% of cases, the death of the plant at this stage arises due to excessive convergence. However, the lack of moisture will also negatively affect the health of the sprout. Therefore, most professionals recommend watering the ficus with small portions, as soon as the upper part of the substrate begins to push.

As for fertilizer, they should not be made within the first 3 months without special needs. However, if you see a noticeable lag of some cuttings in growth, you can use organic additives intended for ficuses. Special alert should be treated with nitrogen fertilizers. This trace element often does not reach the exotic flower, but the excess leads to the death of the root system.

Reproduction with sheet

Do not know how to propagate a large ficus sheet? Then the information from this section will have to be very powerful. It is worth noting that the reproduction of the ficus sheet is the most preferred procedure for a beginner flower, since it does not require high time and strength. In addition, the percentage of rooting in this case is much higher than in the previous one, and the planting material is not difficult to prepare.

Pile of ficus with leaves.

To begin with, we harvest the stalks with a large sheet. As in the previous case, it should be preferred to such a landing material, which has already been delayed quite strongly. Cuts a cutlets at an angle of 45 ° sharp knife at a distance of 5 centimeters from the base of the sheet. After that, it is necessary to handle the cut in the stimulant of the root formation and immerse the cutting into the water. For ease of care, you can wind the sheet into the tube and tie a thread.

Do not be afraid to shorten the sheet, cutting a large part of it, if it turned out to be very big. Such actions will help noticeably reduce the rooting time, since the plant will not spend too much strength to maintain the vital activity of unnecessary parts. As soon as the first roots will appear on the process (2-3 weeks), the cutlets are placed in a substrate with a pre-cooked ground. To create a greenhouse effect, you can use a plastic bag.

Air reproduction process

Now you know exactly whether it is possible to multiply the filhes with cuttings. However, far from all cases are used by the two methods described. Sometimes an old tree ficus is easier to propagate with air chains. This procedure is considered quite complicated, so it is recommended to resort to it only to professionals. You can learn from the algorithm of actions that is described slightly below.

  1. We determine the optimal height of which will be groaning. It is necessary to choose such a place so that the flower does not exceed too much. Otherwise, the branch may simply break.
  2. Sut off the adult leaf on the spot and make a small vertical incision on the spot. We put inside the match so that the hole always remains open.
  3. We take a small amount of wet moss and put it on an airbag. Consign the sphagnum using a conventional food film. However, be sure to leave some air under it.

Once all the steps are completed, it is necessary to continue to care for an adult plant just as it was done earlier. After 3-4 weeks, the moss will turn up with young roots, after which the film can be removed. It will only be left to separate the grooves from the main part of the plant and place the branch in the new container. Further care for a young flower is no different from the rules for caring for cuttings.

Basic mistakes made by newbies

Now you know how the large-scale fiber is breeding most of the flower water. However, if you want the event to be promoted, we strongly recommend that you familiarize yourself with the main mistakes that lovers make. This will not repeat them in the future. In addition, the list below presents ways that will prevent the worst development of events if the error has already been done.

Ficus with white leaves.
  1. Excessive irrigation - the soil begins to trigger with an artificial way.
  2. Too dry air - can restore the microclimate by spraying.
  3. A sharp temperature difference - all diseases are treated with the help of fungicides.
  4. Infection of pests - the flower is sprayed with insecticides.
  5. Sunburns - the plant is pronounced by the grid.

And these are the most common mistakes that make novice flowers, as well as methods of combating them. However, it is worth noting that far in all cases you will be able to return the flower of force if the state has already been launched. For example, after a strong damage pests there is a chance that the flower will never restore. And when developing root rot (fungal disease) you can safely throw ficus - it will not be able to save it.

Several useful advice from professionals

Many people are asked about how to propagate the ficus (largest) at home. You can answer it with the help of several tips that give professional flowerflowers on various thematic forums. Especially for our readers, we studied the most common of these tricks and gathered them in one place. For more information, read the list below.

Large variety of ficus.
  1. From one branch, you can get as many cuttings as the leaves are on it, because for successful germination, the landing material will require only one entire sheet or eye.
  2. To increase the chances of rooting, the cuttings must be cut to the sharp blade at the bottom. If we are talking about a ficus tree grade, then this incision should look like a cross.
  3. In order to young plants, they put roots faster, try to monitor the optimal temperature of the soil, creating a greenhouse effect for this. Eighteen degrees Celsius - the best indicator.
  4. Rooting will also pass faster when using various phytohormones. You can get them from special mineral and organic fertilizers.
  5. With the reproduction of the old ficus, it is best to use the air chain method, since it will be very difficult to prepare the cuttings of the appropriate quality.

In other cases, professionals advise to adhere to the same rules that have already been described in the previous sections. Is it also necessary to take into account the nuances of breeding, which are characteristic of one or another variety. However, for most beginner flower, such information will be unnecessary. As a rule, she enjoys those who plan to dilute the ficus at home on a large scale, not spending a lot of time for this.

Is it possible to multiply the ficus seeds?

To multiply Fux flower by a generative way, you will need to purchase landing material in a specialized store. It will be almost impossible to get seeds at home, because there will be special insects-pollinators. However, most inexperienced flower flows takes fancy berries-inflorescences for seeds, which actually cannot be used for breeding.

Ficus with long leaves.

If you managed to acquire the sowing material of the ficus, the only thing that is required of you is to prepare high-quality ground for planting. In the usual substrate, which is used during stalling, the seeds will not be able to bite. Professionals are recommended to make a mixture on their own using for this moss and peat equal to quantity. Alternatively, sand (1 part) and humidier (2 parts) is suitable.

The cooked substrate will have to sterilize the ferry in advance in order to eliminate all the harmful microorganisms that inhabit it. After that, the seed material is treated with fungicides and growth stimulants (using a pulverizer, and it is also placed in the soil to a depth of 0.5 centimeters. It is ultimately not recommended to spread the seeds too close to each other if sowing is in special cassettes.

Care for young seedlings

About how to propagate the fillet with cuttings (photos of the plants are presented in the review), it knows almost every flower. However, only professionals are known how to properly care for young seedlings. For example, so that they proceed, it will be necessary to maintain the temperature around 22-23 degrees. It is also strictly forbidden to allow direct sunlight to seedlings, so that the sowing material simply does not "cook" and did not die.

The first shoots usually begin to appear after 1-2 months. As soon as they fix a little (3-4 days), it is necessary to start shooting a greenhouse for several hours a day, so that the plants have not experienced strong temperature differences. Watering is carried out using a spray gun until 3 young leaves appear on the sprout. After that, you can start to take care of the ficus, as for an adult plant. The transplant in separate containers is possible after 8 days.

It is not difficult to guess that this method of reproduction is very unpopular because it requires quite a long time. In addition, the percentage of seed geimed is a little more than 30% - quite a little for room culture. Therefore, novice flows should be used vegetative methods that are simpler. In addition, a subsidiary, obtained from the cuticle, retains all the qualities of the parent.

Conclusion

We hope now you know better how to propagate a large ficus at home. For an experienced flower, this procedure does not represent anything complex. Well, the newcomer can use the leadership, which is described slightly higher. In addition, if you are wondering how to propagate a large ficus at home, you can see a small video in which it is described in more detail. Successes!

Modifying the ficus at home can be in several ways: cuttings, air and horizontal glasses, seeds, cloning. The optimal temperature for rooting the flower is 24-28 ° C, the humidity is 80%. Listed further propagation methods are suitable for all types. But, based on each specific species, you can choose the one that will be most comfortable.

Preparation for the breeding process of ficus

It is better to prepare a special place where all subsequent actions will be carried out in order not to tolerate the pot with a plant, tools, and so on from place to place. And also to immediately provide the plant with everything necessary. If lateral shoots are required for breeding, you can affect their growth in advance. For this you need Protect ficus in a timely manner. It usually cuts its top, after which the plants will begin to appear on the sides of the plant.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Depending on the method, special tools may be needed:

  • Ordinary scissors or knife with sharpened blades, stationery knife, blade. Dumb tool is not categorically suitable, as they can be injured and the plant itself, and the future seedling, which will lead to death .
  • Still for breeding, except for the cutting tool, requires special mixtures, containers for germination
  • You need to prepare the necessary soil and drainage.

Conditions for breeding

  • The young plant is very sensitive to the compliance of the temperature regime, so the florist will have to constantly monitor this indicator;
  • The right location of the flower vase is also of great importance for the development of young culture at home;
  • Within a few days after the reproduction, it is necessary to carry out regular watering and monitor the level of moisture in the soil;
  • After breeding or transplanting, feeding should be carried out no earlier than two weeks after rooting;
  • It is necessary to plant material for reproduction to the soil according to certain rules that will be described in the following sections.

How to propagate the ficus cuttings

Take the proceedings in the ficuses allows both the uphelling shirts and the pruning of the middle of the escape. Top - Surrive faster. Correct cuttings are obtained from the stem with the interstitial. The optimal length of the process depends on the variety of the plant: for mellite crops of the Benjamin type, 10 cm is sufficient (preferably the presence of 3-7 sheets), for rubbing and lovidamny - 15 cm (2-4 sheets).

  1. Large library features cut 2/3 sheets, reducing the level of evaporated moisture.
  2. The rubbing varieties of gardeners twist the leaves into the tube and neatly fixate with a rubber band or rope, keeping moisture in the process.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Milk, remaining on the process, prevents the formation of the roots. Solve the problem will help the bottomage of the lower part of the stem in warm water (2 hours) with further processing of the growth in the growth stimulant. Having a charcoal, many hostesses will certainly wish to carry out the disinfection of the cut.

How to take a process at the ficus

The drawing of fishetic processes is carried out with a sharp knife or scissors at an angle of 45 degrees, without tearing hands. Attempts to break the stem manually threaten the unsuccessful or protracted process of rooting. Take cuttings in March or April.

Until winter, the plant has time to root and strengthen. Further transplant is carried out once / year, older plants can not be disturbed 3-4 years.

First of all, you should prepare a landing material. To do this, it is necessary to cut a part from the top of the crown using sharp scissors. If you decide to propagate a variety with large leaves, it should be at least 3-4 leaves on each cutken, and 10 centimeters are considered the most optimal length of the cutting.

For a faster rooting, it is recommended to process the bottom of the stimulators of the root formation, after which they put the cuttings into the water for 2-3 weeks. As soon as the root system is developed quite well, the young plant can be planted into the ground and continue to care for him, as an adult culture.

Breeding ficus with stalks

When multiplying the ficus in this way, ficuses with large leaves are mainly multiplied. This is a good way to use a part of the stem, on which there is either a sheet, or several kidneys, which will later become shoots. If you take a large stem, then it can be divided into several parts and use in reproduction. How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

This method is good if you decide to cut or rejuvenate your ficus, or accidentally it happened that the escape is broken. We take the right stem, which we will breed. It can be divided into several parts. Everyone's length should not exceed five centimeters. And on each piece of escape should be sleeping kidney or leaf.

Reproduction with sheet

Some professional florists prefer to multiply a ficus of Benjamin with the help of leaves. This method differs from the previous more thorough care for a young plant, but from one bush you can get a huge amount of planting material.

The method involves growing culture from a part of a stem with one sheet.

The lower cut is performed at an angle directly by intersaline. The segment is immersed in a substrate to a stainstand.

The sheet is twisted by the owner of the flower into the tube, fastened with a rubber band. Further actions are similar to rooting wood cuttings.

Important! A separate ficus leaflet (without stem) with a long stay in the water will definitely stop the roots, but the sheet shoots will not give.

Sing of leaves from the top of the plant

As in the previous case, work should be carried out exclusively with sharp scissors, which are also recommended to be treated in a weak solution of manganese. The cut must be carried out in such a way that a small stalk remains on the sheet, from which the roots will be formed. To speed up the process, it is recommended to use the root formation stimulator.

After preparing the material, the leaflet is placed in a shallow capacity with the water of the lower part. As soon as he gives small roots, they transplant it in a pre-prepared soil with a good consistency (air, without lumps). After that, the young plant will need frequent, but not too abundant irrigation, otherwise the excess of moisture will lead to the development of fungal infection.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Scroll of leaves from the bottom of the flower

Also, planting material can be prepared from the bottom of the ficus. Such leaves are more developed, so you do not have to use the root formation stimulator and place the planting material into water for a long period. You can immediately put it in the substrate, abundantly moisturizing the soil.

About a month later, the boarding material is well rooted, after which it can be transplanted into another container and begin to care for it, as an adult culture. However, it is strongly recommended to maintain the optimal humidity of the substrate with spraying and monitor the soil temperature.

Reproduction with chains

Reproduction with tanks can be two types: air and horizontal. Each of these views has its own characteristics, but both of them will suit more for flowerflowers who have already experience in reproduction of plants. Reproduction by air chains Even in the event that the stalk of the ficus is too bare. For reproduction, this way is also better to use adult plants.

For reproduction, you need to choose Not less than 50 cm in height. It is necessary to cut off the sheet from the barrel at the height on which you need to get a tank. It is necessary to do so carefully and ensure that the bark is damaged in the process. On the spot of cut from the leaves is made a shallow incision. It is best for such a goal a stationery knife or blade.

The juice will be highlighted from the end, it must be removed by cotton, constantly missing until the juvenocation stops. A match is placed in a screw, a toothpick or a small chiner, which will provide oxygen access inside the cut.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Air chains

Still did not decide how to propagate the ficus? Then we recommend that you familiarize yourself with another method that will allow you to get a new plant for a fairly fast period. It is best to apply this method on adult plants. Also, for a successful conduct of the procedure will have to get acquainted with the theoretical part of how to do it right.

So, as in the previous cases, it is necessary to properly prepare the planting material. To do this, you must choose a developed root process on the village, after which it is completely cleaned from foliage. It is necessary to do it extremely careful not to damage the peel in the process. After that, a small suction is made on the bedside flower stem. Then it will only be able to moisten the cut by water to form roots in it. As space, you can use a match or toothpick.

The first roots on the stem will appear in approximately 15-25 days after the procedure described above. After that, the escape is cut off from the parent plant and landed into a separate container with a pre-prepared substrate. Do not forget that the ficuses are quite poorly tolerated drought, so the culture will have to regularly moisturize.

Horizontal challenges

The reproduction of horizontal glasses is carried out with ficuses with curly stems. In this case, the future escape does not wind moss. The stem is also cleaned by the leaves, they make a knife on the cutting cut, and then fix in the ground, processing cuts by a pre-stimulator of the root formation. When the glasses give roots, it will be possible to separate it from the parent plant and transplant yourself.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Reproduction of seeds

Dilute ficuses from seeds, allegedly received at home, will not work. What some are accepted for seeds is actually bodies-inflorescences. Fikus seeds require insect pollinators. If there is a desire to grow ficus from seeds, they need to be purchased in the store. The reproduction of ficus seeds is the most difficult of all ways.

  1. Before sowing seeds, they need to be treated with their substance to get rid of spores and fungi "Fungicide" and a stimulant of growth.
  2. As a soil for the future ficus, it is worth choosing a mixture of peat moss (sphagnum) and peat. It is also suitable for a mixture of two parts of the usual humoring and one part of the sand.
  3. Before planting plants, the soil is better sterilized by steam.
  4. Best of all, a flat container is suitable for disembarking seeds - it will be convenient to close the film, follow the moisturgenicity of the soil and the behavior of the seed. It is necessary for the presence of drain holes for outdrawal of excess fluid. Capacity due to be clean and disinfected.

The soil must be pouring into the container, slightly strip and spray. Watering the soil can not. Seeds are laid out on the moistened soil. Do not lay them out too close to each other so that they do not have lack of illumination.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

The temperature during the period of germination should not be descended below + 22- + 23 degrees. If you allow sending to seeds of direct sunlight, they will die. The film must be periodically opening and closed to close the seeds to have access to fresh air. It is impossible to moisten the soil. Instead of film, you can use the glass, which will be more convenient. When the seeds go up, they need to teach to the room climate. For this, the glass will be conveniently put on the backups, providing a constant air flow to spons. So leave for 3-4 days, allowing spons to get used to the new temperature regime.

Showing seeds can take a long time. In this case, it is not necessary to navigate for some time deadlines, but in appearance. The seed must put the roots, and the next stage will be the appearance of leaves. Sprouts are ready to transplant when they appear four leaves and more. It is possible to plant them in a common capacity, But necessarily retreating the distance of about 4-5 cm.

Young ficus sprouts obtained from seeds require frequent transplant. In the first eight months of life, this is done several times. This frequency of the shift change favorably affects the root system, stimulating its development. After these two months, young plants can be planted separately and start feeding fertilizers.

How to send and root

Seared plants better once a year. It is best to do this in the spring, while the temperature should be from 24 to 27 degrees.

Saplings do not like direct sunlight But in full shadow they will not develop, so you need to ensure that the plant gets a sufficient amount of light.

The soil should always be maintained slightly moistened, the plant does not like surplus water, but also in dry ground during seeding will not develop.

When clearing, the soil must be replaced and add universal feeding to accelerate growth. Fertilizer is enough to breed in water when watering.

In compliance with all the presented recommendations, shoots will develop without problems, and the procedures for dispelling and rooting will not cause difficulties.

Features of breeding depending on the type of flower

The variety of ficuses can hit the imagination. But it can create a number of problems for those who dream to create their own own garden in the apartment or in the country. After all, each plant requires an individual approach and has its own characteristics.

Flowers use many methods for breeding plants. The most popular among them:

  • cuttings;
  • with the help of air regulations;
  • Rooting leaves.

The method is selected depending on the type and age of the mother tree.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

How to plant a spool ficus process?

For breeding wide types of ficuses, the method of shilling and landing is best suited.

But the easiest way to send an adult plant during transplantation:

  1. During the day before moving the ficus to a new porridge, it must be poured.
  2. Shooting comers with the roots of an adult plant, carefully inspect the sprouts who have already crushed roots.
  3. Carefully separate them from the main root, trying to damage as much as possible.
  4. To plant a new plant in a nutritious soil prepared for it.
  5. Water with solid with additives facilitating rooting.
  6. Cover the glass can or polyethylene by creating greenhouse conditions.
  7. Every day to water, ventilated for 30 minutes.

Important! Both the parent plant and the new ficus need special care after a transplant, one should not touch the young (up to 3 years) a tree or a weakened plant.

Without a transplant, you can get a new flower, rooting the gag. To do this, repel the top of the ficus - a cutlength of 10 to 15 cm long, preferably semi-restned, process the cutting place by a disinfecting composition. The escape is placed in the nutrient solution until the roots appear, then planted into the ground.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

Some flowers take on the cuttings of the tank and from the middle of the trunk, but they should be at least 3 leaves. The tanks are also kept in the nutrient solution until the roots appear or planted immediately into the prepared soil, they are abundantly watered, the sheets are gently folded with the tube or cut to half, which helps reduce moisture consumption and increases the chances of the rapid appearance of new roots.

If everything is done correctly, a month later, young leaves will appear on the new tree.

How to reproduce Ficus Benjamin?

A beautiful green tree becomes a real decoration of any room, his dark green shiny leaves even in the frosty day resemble a hot summer, glading. The straight trunk, a thick crown, the abundance of foliage - and all this with a sufficiently small number of concerns. For this and love the flower ficus. It is enough just to know how to propagate the plant.

In the spring, Benjamin needs trimming, without which his crown can randomly grow up, giving a tree a neakkuratic look. Cuttings, abundant remaining after that, are used as a planting material.

  1. On a branch, a length of at least 10-15 cm, leave 3-5 upper leaves, the rest are neatly cut off.
  2. The cuttings are placed in the crown solution, any other nutrient mixture for accelerated root formation.
  3. The cutter with a cutter is left in a shaded, but not too dark place, with a constant temperature of about 23 degrees.
  4. After 2-3 weeks, when the stalk gives the first roots, the plant is placed in a specially prepared primer for ficuses and covered with a film or a can.
  5. Water abundantly, neatly, not giving the soil to dispel.
  6. Another 2-3 weeks, the plant gives new kidneys, and it means that it gothes.

Interesting! Dropped fully leaflets on a cutlery do not say that he died. So the plant is trying to preserve the nutrients necessary for the growth of the roots. Do not panic and get upset, the roots will appear in a few days.

How to root a tree ficus?

Robusta, Tineke, Belasts and other types of tree ficuses - rubberous trees, in the natural environment in a hot wet climate they grow up to gigantic sizes. These ficuses in Thailand, India consider the sacred, contributing to the preservation of the world in the family, relieve negative energy.

Transformed by breeders in decorative plants for landscaping apartments, these beauties still affect their power imagination. Huge leathery dense leaves, which are covered with wax, powerful stem, air chains help create chic green compositions from these plants.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

For reproduction, they take, as a rule, the top shoots.

Attention! Rubberos can damage the skin of the hands with their juice, cause burns, so it is necessary to work with them in gloves.

  1. The top of the adult plant is cut under the angle of a sharp tool, leaving up to 5 leaves on a cutken.
  2. Wash under the crane space of a cut with highlighted juice.
  3. Fill or cut to half leafy plates.
  4. It is placed in a nutrient solution, poured into an opaque container before the appearance of the roots.
  5. Transplant to the ground for further growth.

Sometimes shoots germinate in the sand, which is constantly moisturized, but it takes more time and does not make it possible to notice the appearance of roots.

How to breed a Bengal look?

One of the most interesting types, in nature, one tree may seem like a whole forest. And all thanks to the air roots that appear on the long branches are descending to the ground and germinate, turning into strong trunks. Flower, using this feature, create compositions from the air roots in the form of openwork patterns, braids, lattices.

Ficus Bengali can be diluted at home, reproducing not only with the help of air roots, separated in the soil, but also cuttings, seeds - after flowering, it appears similar to the berries of the fruits that feed birds. The flowering of these ficuses is a frequent phenomenon, so get seeds are quite real.

  1. Seeds are sown in a light peat soil in small tanks with sideboards about 5 cm in height.
  2. From above sprinkled with sand-peat soil (no more than 1 cm layer).
  3. Good moisturize.
  4. Close the container with glass or transparent film.
  5. They vent and water every 3-4 days.
  6. Seed shoots are waiting for up to 2 months.
  7. Capacity with sprouts put in a light warm place, waiting for the appearance of the first leafs, and then, after 3-4 months after the appearance of sprouts, transplanted into the pots.

The time consuming and requires constant attention to the process of fascinating for true connoisseurs, which observe the process of growth of the village from the first moments of its appearance.

We bring together this species and cuttings, germinating with a weathered side and elite shoots.

Breeding and landing of large-scale ficus

There are copies among the ficuses, affecting the size of the leaves. Some plates in length grow to half a meter, lovoid surprised by carved edges and veins, the drawing of which makes them similar to this musical instrument.

How to propagate the ficus at home with cuttings, grain, sheet, seeds - step by step

To multiply large ficuses can be seeds, although this is the most, perhaps an exotic and complex way. More often with cuttings, which are germinated and rooted, or roots on the air stalk, devoid of the bark, or planted with leaves.

  1. A large sheet with a stalk, on which there is a kidney, cut off with a sharp tool.
  2. Warm water from juice.
  3. Place into a toss with a row or other nutrient mixture.
  4. Cover with glass or film, making a "minibar".
  5. He exhaust within a month.

After the appearance of thin, fragile roots, the plant is planted in a small pot, filled with drainage and a mixture of peat, sand and a small amount of garden land. The plant is covered with a glass jar. Moisturize the soil, priest and watching the temperature to be constant and not lower than 23 degrees, are waiting for 3 months. When the ficus begins to grow, and the first leaves will appear on it, it can be planted in a more spacious container.

Important! It requires a good saturation of the earth with oxygen, so in the tanks there must be holes. Not only at the bottom, but also on the side.

When planting a leaf with a cutlets in the soil, the plant is not recommended to plunge: if the growth point is under the soil layer, the ficus will die. Neutral light soil, heat, constant careful moisturizing and watering root growth activators give good fruits.

How to reproduce the ficus?

The genus of ficuses includes more than five hundred different types of plants, both indoor and wild. But the fountain is popular as a houseplant. The main role in such popularity plays a variety of ficus forms. He may look like a small tree, liana or bush. And also the genus of ficuses is distinguished by a large number of variations of forms, colors and sizes of its leaves. Many also believe that the ficus is an absolutely unpretentious plant, but it depends on its species - there are also quite capricious.

Ficus reproduction requires the implementation of certain recommendations, So that the parent plant is not injured, and the process gave roots and grew up in a new healthy plant.

Features

In order to propagate the ficus correctly, Determine its appearance will be useful, but not necessarily. Listed further propagation methods are suitable for all types. But, based on each specific species, you can choose the one that will be most comfortable. Ficus is a room flower, but with its needs. They must be taken into account when the upcoming reproduction. These features include Love for warmth and dislike for bright light, preference of a certain soil, periods of the active phase and the phase of rest.

Low temperatures are contraindicated in ficuses, so for the plant you need to maintain the optimum temperature and avoid its sharp drops. This is especially true of the period of breeding and winter: sprouts will not survive at low temperature and without ensuring the necessary temperature regime, too. Winter is not suitable for breeding ficuses, because the flower is at rest, and most likely the plant will not give roots and just perish.

Before making a transplant, it is stepdown to familiarize yourself with the instructions in order to fulfill everything correctly and get the desired result. When fulfilling all the requirements and tips, the ficus will be unmodulously.

Training

Before carrying out the process of reproduction, any of the available ways needs to be prepared everything you need. It is better to prepare a special place where all subsequent actions will be carried out in order not to tolerate the pot with a plant, tools, and so on from place to place. And also to immediately provide the plant with everything necessary. If lateral shoots are required for breeding, you can affect their growth in advance. For this you need Protect ficus in a timely manner. It usually cuts its top, after which the plants will begin to appear on the sides of the plant.

Depending on the method, special tools may need - these are ordinary scissors or knife with sharpened blades, a stationery knife, blade. Dumb tool is not categorically suitable, as they can be injured and the plant itself, and the future seedling, which will lead to death . If for reproduction, in addition to the cutting tool, special mixtures are required, containers for germination and so on, all this needs to be prepared in advance. You need to prepare the necessary soil and drainage.

Be sure to prepare a place where the plant will be able to put roots. To such a place have certain requirements . The windowsill will not be the best choice for the life of the ficus, especially on the sunny side of the apartment, since the sun's rays will be destructive for him. The best choice will be Place in the shade. Another required requirement for the location of the flower content is a sufficient amount of heat. Often room temperature is not enough to germinate the plant, then you need to prepare a small greenhouse in advance. It is worth thinking about it before making any manipulation with the plant. If you do not provide him Necessary temperature mode Immediately after placing the future seedling in water or soil, it is possible to harm him and not get the desired result.

The choice of time for breeding the ficus is very important. Summer or spring period is suitable, in winter it is impossible to engage in reproduction. In the cold season, the ficus becomes very sensitive to the sharp drops of temperatures and can die when attempting reproduction. And in winter, a hibernation occurs in the plant.

Most often, they are advised to make a reproduction of early spring, when the plant wakes up from the winter hibernation and enters the phase of active growth.

Methods of breeding

Despite the diversity of types of ficuses, with their reproduction is quite simple. All of them multiply the same, which simplifies the task of the owners of these indoor plants. For all types of ficuses, there are such breeding methods as:

  • cuttings;
  • grains;
  • sheets;
  • Seeds.

All these ways are suitable in order to sear the ficus at home.

Thanks to the characteristic features of each method, you can choose the appropriate option for each particular plant.

Cherenca

The reproduction of cuttings or hauling is one of the simplest ways to get a new plant from the already existing one. This method is excellent for deciduous types of ficus, for example, for Benjamin ficus. This way can be obtained from the branch from the top of the plant brand new. Important working conditions - it is not conducted with plants under 2 years of age, it is best for such a way already wearing all-west shoots. If you try to apply such a way to a young plant, it hurts it. Due to the injury, the form of a ficus can be might and slow down its growth.

Important! From the top of the ficus you need to measure about 10-15 cm - this will be the future stalk. At the same time, the distance to the first node must be at least 1 cm.

To reproduce those types of ficuses that have large sheets, the cuttings can be taken not only from the top, but also from the stem. But then an important condition for the future cutlets is the presence of leaves. If there are at least three leaflers on the side process, it will suit. These leaves are not cut. If there are too many leaves on the cutting, it is better to remove them with a knife, leaving those that are located on the top of the tip.

Important! The cutlets should not be bare stick, but also be completely in the leaves it is impossible. The leaves consume moisture when they are too much, they deprive the necessary moisture of future roots, not giving them to develop.

The cut is made using a sharp knife or scissors and necessarily at an angle - so the cutlets will be easier to absorb moisture. The cut must be rinsed with warm water from the released juice and leave the cuttings for a while lie down to cut the cut. If you leave the juice to dry out on the cutter, it may affect the rate of appearance of new roots, lowered it. To accelerate the formation of roots on the cutlets, they are advised to make a cruciform notch on the lower cut.

The cutlets are placed in water tank. Instead of pouring water, you can also line up the bottom of the wet wool tank. Capacity with ficus need to be removed in a warm place for 3-4 weeks. During this time, the cuttings are rooted and will be ready for transplant. And also is familiar that the plant is ready for transplant, can serve as young leaflets on the cutting tree.

Important! Ficus starts roots at an average temperature of +24 degrees, so the future sapling is better to put in a greenhouse, if there is no confidence that there is enough room temperature, or if there are strong temperature differences during the day - this is often found in the spring.

Plant to plant better in a small pot. Use as a soil is recommended peat and sand. If the room is still quite cold, the sapling can be covered with a transparent cap to maintain a higher temperature and continue to keep in a warm place. The stalks are periodically sprayed, and the plant itself is watered. In the event that the sapling grew under the cap before you leave it without a personal greenhouse, It is necessary to gently teach it to room temperature.

Digging

Reproduction with tanks can be two types: air and horizontal. Each of these views has its own characteristics, but both of them will suit more for flowerflowers who have already experience in reproduction of plants. Reproduction by air chains Even in the event that the stalk of the ficus is too bare. For reproduction, this way is also better to use adult plants.

For reproduction, you need to choose Not less than 50 cm in height. It is necessary to cut off the sheet from the barrel at the height on which you need to get a tank. It is necessary to do so carefully and ensure that the bark is damaged in the process. On the spot of cut from the leaves is made a shallow incision. It is best for such a goal a stationery knife or blade. The juice will be highlighted from the end, it must be removed by cotton, constantly missing until the juvenocation stops. A match is placed in a screw, a toothpick or a small chiner, which will provide oxygen access inside the cut.

The scenes should be enveloped a little moistened with moss. It should not be wet, only a little wet. The finished moss "tire" is required to wrap the food film. Under the captive, it is desirable to leave some air and firmly fasten it on the trunk. In the process of rooting, you need to ensure that To moss under the film did not drive. If necessary, it must be moistened again.

Important! Instead of moss, it is also permissible to use the soil enriched with peat, but moss remains preferable for these purposes.

The occurrence of roots with such a breeding method is 15-25 days. Shootless shoots cannot be cut off. Future seedlings will be ready for disembarking only when the root system will definitely develop. Only in this case the escape can be cut off from the parent plant and plant in a separate pot.

The reproduction of horizontal glasses is carried out with ficuses with curly stems. In this case, the future escape does not wind moss. The stem is also cleaned by the leaves, they make a knife on the cutting cut, and then fix in the ground, processing cuts by a pre-stimulator of the root formation. When the glasses give roots, it will be possible to separate it from the parent plant and transplant yourself.

Leaf

With large-scale types of ficuses, you can grow a new independent plant from the sheet. The reproduction of this way can be carried out with large leaves of the best quality. Cut sheets needed with a small part of interstices. Two cuts are done: the main and one more oblique so that the root system develops faster. Leaf need to rinse under running water or soak to get rid of unnecessary juice. If this is not done, the root formation process can significantly delay. The cut is better to process the root formation stimulant, which is optional, but will give more chances that the leaflet will turn into an independent plant.

Before disembarking, it is necessary to prepare the soil: it is usually soil mixed with a small amount of sand and vermiculite mineral. At the bottom of the tank for disembarking, you need to send drainage. The container should have holes for removing extra liquid. The sheet needs to be neatly twisted, tied up with a soft thread or fasten with a rubber band. Deepen the sheet to the painshoe, not higher. For 3-4 weeks, the sprout should be finally rooted in the soil. Mandatory temperature for the development of the root system - approximately +27 degrees.

So it is better to clean the tank with a leaflet in the greenhouse if the room temperature is below the desired one.

Seeds

Dilute ficuses from seeds, allegedly received at home, will not work. What some are accepted for seeds is actually bodies-inflorescences. Fikus seeds require insect pollinators. If there is a desire to grow ficus from seeds, they need to be purchased in the store. The reproduction of ficus seeds is the most difficult of all ways.

Before sowing seeds, they need to be treated with their substance to get rid of spores and fungi "Fungicide" and a stimulant of growth. As a soil for the future ficus, it is worth choosing a mixture of peat moss (sphagnum) and peat. It is also suitable for a mixture of two parts of the usual humoring and one part of the sand. Before planting plants, the soil is better sterilized by steam. Best of all, a flat container is suitable for disembarking seeds - it will be convenient to close the film, follow the moisturgenicity of the soil and the behavior of the seed. It is necessary for the presence of drain holes for outdrawal of excess fluid. Capacity due to be clean and disinfected.

The soil must be pouring into the container, slightly strip and spray. Watering the soil can not. Seeds are laid out on the moistened soil. Do not lay them out too close to each other so that they do not have lack of illumination.

In the process of germination, you need to ensure that the soil is moistened.

The temperature during the period of germination should not be descended below + 22- + 23 degrees. If you allow sending to seeds of direct sunlight, they will die. The film must be periodically opening and closed to close the seeds to have access to fresh air. It is impossible to moisten the soil. Instead of film, you can use the glass, which will be more convenient. When the seeds go up, they need to teach to the room climate. For this, the glass will be conveniently put on the backups, providing a constant air flow to spons. So leave for 3-4 days, allowing spons to get used to the new temperature regime.

Showing seeds can take a long time. In this case, it is not necessary to navigate for some time deadlines, but in appearance. The seed must put the roots, and the next stage will be the appearance of leaves. Sprouts are ready to transplant when they appear four leaves and more. It is possible to plant them in a common capacity, But necessarily retreating the distance of about 4-5 cm.

Young ficus sprouts obtained from seeds require frequent transplant. In the first eight months of life, this is done several times. This frequency of the shift change favorably affects the root system, stimulating its development. After these two months, young plants can be planted separately and start feeding fertilizers.

Subsequent care

It is necessary to take care that the young plant get enough light. He is still contraindicated direct sunlight, but light is an important condition for the development of a flower. With a lack of light, additional devices can be used, for example, the backlight, which is usually used for seedlings.

It is important to take care of the temperature. In order for the plant to live in the right rhythm (in the spring phase of growth, and in the winter peace period), it is necessary to maintain a certain temperature. In the summer, the temperature should remain about + 25- + 28 degrees, in winter - + 15- + 18 degrees.

Temperature rule rule is one for all types of ficuses.

Ficus does not like the abundance of water, but her lack is heavier. It is impossible to allow dryness of the soil, but it's not worth watering too much. It is better to provide a slightly wet soil, and in the summer period additionally to watering wipe the leaflets with a damp cloth and spray it from the sprayer. In winter it is not required.

The young plant is advised to transplant 1 time per year. With each transplant, you should choose a pot on 2 size more. Old ficuses also require periodic transplant, but not so often. When transplanting, part of the old soil must be replaced with a new one.

Spring and summer for ficus is a period of active growth. At this time he is required Additional feeding. It is desirable to conduct it approximately 1 time in 2 weeks. Ficus can be picked up with a solution of universal fertilizers for indoor plants. The soil for ficuses should be easy, but nutritious. Fertilizers are not necessarily added directly to the ground, it is enough to dilute them with water and feed the plant during watering.

About how easily and quickly multiply Ficus Benjamin, you can learn more.

Description Fikuses

Roots in some ficuses are so strong that they can penetrate the cracks of the stony rocks and destroy them. Some of the representatives of the genus Ficus are fasciners of fellow from the plant world - they begin their life cycle on the branches of other plants, where in the form of seeds with the help of birds and winds.

Different types of indoor ficuses

They do not need soil for growth. They germinate in the tissues of someone else's plant and get life forces from him. Absupping the sunlight and moisture from the air gradually form air roots, which then soak the owner of the place, oppress it. As a result, the plant, who sheltered someone else's seed dies, is growing above it, leaning on an openwork of the root system, ficus-cutter.

Air roots Fikus

Of the 1000 plants included in the genus, dozens of his representatives fit into the home interiors. Various indoor ficuses were popular in the era of our great-grandmothers. The list of the most famous includes tree types:

  • Various varieties of large-leaf and mellite ficuses of Benjamin with drooping branches and densely located leaves;
  • Rubber varieties containing Milky Juice in their stems;
  • Pepling varieties with different shape of leaves.

Important! Flowers believe that the breeding of ficuses is not a complex business. Indeed, knowing how the ficus multiplies, with the right approach to the cultivation of these plants, it is possible to grow them without much effort.

Several important nuances

Decided to dilute the ficus at home? Then you most likely know that most plants are multiplied by three ways: stalling, decodes and with the help of seeds. Immediately it is worth noting that the last way it makes sense to spend only if you are a professional breeder. But all other techniques will simply show an excellent result. But only a number of certain nuances should be taken into account before reproduction.

Ficus growing on Street.

  1. Season. It is strongly recommended to conduct a reproduction procedure exclusively in the warm season. May and August are considered ideal months. However, if you decide to multiply Ficus in June or July, then your idea is most likely to be crowned with success. But in winter or late autumn, the plant is better not to disturb. Even if you manage to multiply the ficus, the process will often be sick and in general look weak.
  2. Sun protection. Young processes extremely negatively belong to the straight sunshine, so it will have to do in the northern room, where the risk of burning burns to the leaves will be minimal. If such an option is not possible, then be sure to use the shading. This can be done with a dense tissue or a special garden grid, the percentage of shading is 60%.
  3. Clean and sterility. As soon as your processes give the first roots, you will have to transplant them into individual pots, pre-processing the stimpler with the root formation. However, all the tools used must be clean and sterile. The same applies to the process of harvesting the planting material. Be sure to handle scissors or a secator in an alcoholic solution or manganese.
  4. Watering. During the first days after the transplantation of a young cutter in a separate container will have to use only warm and dilated water. It is best to give preference to that giving fluid that is collected after the rain. Well, or as an alternative, water is filtered by coal. However, in any case, it must first purchase a soft structure, standing 2-3 days before it can be used for irrigation.

And these are only the main nuances that relate to the breeding of the ficus with a sheet or cuttings. Also, experienced gardeners give quite a lot of useful tips on how best to carry out one or another procedure. In the following sections, you will find more detailed information about this. In addition, they will also provide a detailed algorithm of actions, which must be followed in order for the reproduction to be successful.

How the ficus of Benjamin breeds

Dilute Ficus Benjamina can be cut, air chains or seeds. The first two ways are vegetative, which are cloning, when subsidiaries do not differ from the maternal. They are the most simple. With cheating easily, inexperienced hotel lovers are coping.

Grow ficuses from seeds is unreliable. Even if they have a good germination and proceed, bring shoots to the state of an adult plant not easy. So get the varieties of Benjamin, propagate that there is no fault in vegetatively.

How to propagate the fillet with cuttings?

Fikuses spread only vegetatively. Let us dwell in more detail on the most popular shine technique. Check out the ficus in the spring and continue until mid-July, that is, in the stage of the most active growth. For reproduction, cutting cutters with a size of 10-15 cm , grow a full-fledged plant from a very small cutken will not work.

The processes should be cut off with a sharp knife either by the secateur, and the cut must necessarily be oblique. It does not matter where the stalk was taken - it can be like a top with leaves and a stem fragment taken on the trunk. The most important thing is that the plant itself is young enough Otherwise, the cuttings simply will not let the roots. At the same time, you should not use too young plants - stems must be weeddown.

On the cutting section, crashing milky juice is usually distinguished, it is necessary to get rid of it, since this adhesive substance clogs the slice of a rather dense stopper and thereby overlaps the flower paths. As a result, the ficus can no longer develop and dies.

To avoid this, it is necessary to rinse the cuttings either to withstand in a basin with warm water until completely removing all sticky residues. Then the blanks of a couple of hours are dried in the fresh air and only after that proceed to rooting.

The easiest option is to place the cuttings in soft water. To do this, all the following leaves are removed, there are several cuts along the base and the cuttings are placed in a water vessel. The substrate should be room temperature, it is desirable to breed a little methylene blue in it or put a tablet of activated coal in it - these measures will be removed the future plant from getting in water. If you wish, you can add a bit "Korenev" - This is an effective stimulator of root formation, which contributes to the rapid development of a healthy root system. Water must be changed every week.

Best of all the ficuses of all varieties are rooted at a moisture level of 70-80% and a temperature background of 25-30 degrees. To create such conditions, you can build a small greenhouse, To this end, a segment of a conventional plastic bottle or a plastic cup, the walls are darkened onto the container with a sprout. After 3-4 weeks you can notice small white growths - it is from them in a few days the roots begin to grow. When the roots reach a length of 2-3 cm, the ficus must be transplanted into the ground, where the process will continue to reproduce already in a permanent place.

Keep in mind that Do not disturb the flower in the water, This is fraught with the reinforcement of young, rapid roots. . Some flower products prefer to plant a ficus directly into soil and root already in it. The sequence of actions here is about the same - the stems of an adult ficus are cut into the cuttings, washed from juice and rolled outdoors.

In the cooked land make a small recess, after which it is possible to plant a stalk about 1 node. Earth is moisturized with a pale pink solution Permanganate potassium This allows the plant from probable fungal diseases. Then the mini-greenhouse is then placed on top of a plastic bag and put a pot into a warm sunny place.

After 3 weeks, young sprouts appear, they indicate that the rooting passed correctly. In this case, the greenhouse is cleaned, but it is necessary to do it gradually. To begin with, they pierce several holes so that the plant is gradually accustomed to new environmental conditions and only after that remove the package.

Of the most modern methods of drawing, you can select the use of peat tablets. They contain special stimulants of growth and root formation, which allows you to achieve almost 100% of the effect.

Preparing for rooting is no different from the above techniques, Tablets before planing a cuticle thoroughly soaked And when they swell, they are pretty pressed and used for the basis for the reproduction of processes.

Preliminary processing

In order for the future roots to be easier to break through, experienced gardeners make 3-4 vertical cuts of the cortex at the bottom of the branch, not hurt core (cadmium). The length of these scratches should be no more than 2 cm so that they are subsequently completely in the water.

How to roam the ficus with cuttings, without roots, with big sheets

Immersion in water

To do this, it is necessary to take a small container with warmed up to + 28 ° C with clean water (better than melt) and dip there the lower edge of the escape, about 1.5-2 cm. If there are many fragments, you can fix them in a thin sheet of foam, punctures before that holes of a suitable diameter. Such a "raft" will keep future sprouts on the surface, while their foundations will be in containers with moisture.

Arrangement of a greenhouse

The optimal temperature for the extension of the heat-loving ficus cuttings is + 28 ... 30 ° C, air humidity is at least 70%. Even short-term cooling, drafts or dryness can cause the cutting fragments, so the "tropical" climate should be supported stable. As it is impossible, the battery at the window is suitable for this, but only with adjustable heating. It should be included on the minimum heating, and put on top of the cutting in glass containers. To ensure the effect of the greenhouse, the top of the sprout must be covered with polyethylene chicken or halm from a transparent plastic bottle.

How to roam the ficus with cuttings, without roots, with big sheets

Reproduction by multiple nodes

It is possible to flash the fragmentation ficus not only the topless shoots, and the middle part of the barrel or the side branch remaining after trimming or forming the crown. The principle of reproduction is the same as in the previous chapter.

Rooted cuttings

Differences and additional actions:

  1. Between the cuttings, having at least 1 sheet, but the bare stems are also capable of giving roots. They are cut by a length of 10-15 cm so that each segment contains a minimum of 2 kidneys.
  2. With the reproduction of mature, weathered sites may have a problem. In the knot, the bark should be damaged - to make 3-4 longitudinal cuts.
  3. The oldest stems of stems are better to immediately plant into the substrate, or keep in water only before the formation of the roots of the roots - white growths with a size of 1-2 mm on the part lowered into the liquid. This recommendation of the reinsurer - cuttings can work well if the processes are reached 2-7 cm. Simply during transplantation, long roots often break, and the older Escape, the more reluctant it produces new ones.

The reproduction of the "crutch"

Fikuses form roots in nodes. With mass reproduction of growing as a branching tree, ampel or liana species, this is not a problem. But rubbing immediately a large number of cuttings give simply unable. If you need a lot of planting material, reproduction at home can be carried out in a single way - get a new plant from each node.

"Crutches" call small sections of a stalk with a sheet and kidney in the middle. You can take them as with the green, who did not have time to win the twigs, and cut the pieces of old, covered with the tested bark.

In the reproduction of the rubbone ficus "Crutches" immediately plant in a light substrate. The cutlets can be located vertically or horizontally. The kidney and part of the petiole should be below the surface of the soil, the plate is higher.

Leaf

The method of rooting sheet will allow the shoots to release roots that will help the ficus to be rooted in the ground.

This type of breeding is possible if the leaf is taken together with a part of the stem.

  1. In order for the escape began to grow, it is necessary to place it in the resistant water with the addition of IVV water, which will speed up this process. It is possible to get a screw water by rooting willow branches in another container. Cut it from the barrel is also recommended at an angle of interstitial.
  2. After rooting the cuttings with the leaves, planted into the prepared loose ground. No need to put it in the soil deep. It must be done before the base of the leaflet. The leaf itself must be collapsed into the tube and fix the thread. Capacity should have at the bottom of the hole.
  3. After the process done, the leaflets must be abundantly pouring and covering the film. This will help create a greenhouse effect. After 30 days the first roots will appear.

Sing of leaves from the top of the plant

As in the previous case, work should be carried out exclusively with sharp scissors, which are also recommended to be treated in a weak solution of manganese. The cut must be carried out in such a way that a small stalk remains on the sheet, from which the roots will be formed. To speed up the process, it is recommended to use the root formation stimulator.

Beauty ficus.

After preparing the material, the leaflet is placed in a shallow capacity with the water of the lower part. As soon as he gives small roots, they transplant it in a pre-prepared soil with a good consistency (air, without lumps). After that, the young plant will need frequent, but not too abundant irrigation, otherwise the excess of moisture will lead to the development of fungal infection.

Scroll of leaves from the bottom of the flower

Also, planting material can be prepared from the bottom of the ficus. Such leaves are more developed, so you do not have to use the root formation stimulator and place the planting material into water for a long period. You can immediately put it in the substrate, abundantly moisturizing the soil.

Crossed variety of ficus.

About a month later, the boarding material is well rooted, after which it can be transplanted into another container and begin to care for it, as an adult culture. However, it is strongly recommended to maintain the optimal humidity of the substrate with spraying and monitor the soil temperature.

Leaf care during rooting

Ficus, grown

Ficus, grown

Before starting the process of reproduction, it is best for 1 day before the event, thoroughly pour a bush. It is necessary for the leaves to have a moisture. Only after that start the operation on cutting the leaf of the ficus.

To plant a cutting, both already with the resulting roots, and immediately after cut, it is necessary to prepare the soil.

Mixed in equal ratios (1: 1: 1: 1) sand, peat, charcoal and turf. Or purchase the soil suitable for ficus in the store. Before transshipment, the process in the pot, the earth should be sure to roast in the oven.

Drainage (ceramzit) is placed in the pot on the bottom. Then the used tea bags are stacked - they serve as a sponge for water that keeps moisture and does not give the soil to dispel. Soil is not tamped - when watering it he himself mests. After that, if necessary, you can shove the desired volume.

After the young bus is placed in Vazan, he should create favorable living conditions. For this, the pot is covered with or polyethylene or a plastic cup or a bottle, imitating a greenhouse. A few holes for air ventilation are done in the glass. Such measures serve as a good start for the development of a full-fledged flower:

  • The constant optimal temperature is maintained;
  • There are no cold air flows;
  • Sufficient oxygen flow.

The greenhouse periodically should be discovered so that the stepper gets used to normal living conditions. In these periods, it is necessary to water well, after 7-10 days to feed the fertilizer. Repeat the addition of mineral tools follows when the first sprout appears.

Opinion Expertune Yuryevna

I have a large garden and garden, several greenhouses. I love modern methods of plant cultivation and soil mulch, share experience.

Ask a Question

The disinfection of the soil is an important moment in planting the plant, which protects it from diseases and pest attacks that can be in the soil. But if the thermal method is used, immediately after disinfecting, planting the plant can not be found in the fact that, together with malicious bacteria and disputes, the useful microflora dies. Therefore, after the procedure described, it is necessary to give the earth to stand 1.5-2 weeks, so that useful microorganisms appeared there again. If the soil is treated with boiling water, it is also better to put it.

If there is no time for waiting, you can process the soil with a solution of manganese, the preparation of phytoosporin. Very effective means - dry boric acid. It can be divorced in hot water in proportion of 2 grams per 10 liters and process the substrate. As an alternative to tea bags, we recommend using old sawdust. They can also be added directly to the soil as a ripper, to improve the access of oxygen to the rhizomet.

As for fertilizers, it is better to begin to make it only when the flower is completely rooted in a new capacity. Sometimes the week is not enough, you need to look at the state of the plant. Usually, the accessibility is visible by the state of the crown, the leaves should be elastic and saturated green. This period is not worth using the organic, the dose should be small, and such products are sometimes too concentrated, you can not guess with dilution. We recommend using a complex mineral agent.

Reproduction by air chains

On a piece of ficus stem in size about 15 cm, leaves remove the leaves and make cuts up to 1.5 cm long. Insert matches or dry sticks insert in the slots. A wet moss or sawdust impose on the slits, are loosely wrapped with a polyethylene film. Moss is constantly moisturizing with a syringe.

After the moss surface is beginning to embrozay the ends of the air roots, the film is removed, the tanks are cut below the location of the root formation and plant in the bin with a nutrient mixture.

Additional Information. You can use a method of reproduction with horizontal chains. Press the stem to the ground, deepen, sprinkle with the ground, fasten the bracket. The soil is constantly moisturized. After the formation of the roots, the stem is separated, shorten the top and plant for further rooting.

Reproduction by air chains

Seeds

Ficus seeds can be obtained at home is impossible, because insects need insects - pollinators.

Inexperienced flowers take bizarre berries-inflorescences for seeds.

You can purchase seeds of ficus for its cultivation in retail chains.

Before sowing, they are treated with fungicide, and then a growth stimulator.

Tip: Some flower products advise stratify seeds (withstand them wet, in the package, in the refrigerator)

For sowing prepare a mixture of sphagnum and peat. You can mix the humus (2 parts) and sand (1 part).

Pre-prepared substrate sterilize ferry.

For sowing take a flat wide container with drainage holes.

Before falling asleep soil, the container is treated with a disinfecting composition and washed.

The soil is poured into the vessel, slightly adjusted it and moisturize the spraying method. Seeds lay out on the prepared surface.

Important: Do not post the seeds too close for better illumination.

Sowing slightly suck with fine soil, cover with glass. Put the capacitance into a light warm place with a temperature Not less than 22-23 degrees.

Do not allow the sowing of straight rays of the sun, they "boil" and die. The dishes are regularly moisturized and ventilated. The overvailing is not allowed.

As soon as the first shoots appear, the glass must be lifted, putting on it wooden backups.

Across 3-4 days When shooting should be harvested and get used to the outdoor, the cover is removed.

How to send ficus searches at home? Seared sediments after formation on them 4 leaves. Sprouts follow At a distance of 4-5 centimeters.

The roots are preliminarily cut. Saplings deepen into the soil to the first leaflets.

A feature of the ficus sprout is the need for frequent transplant, so they are transplanted Several times for 8 weeks. It helps to develop the root system.

Two months later, the sprouts are feeding with a special fertilizer for ficus.

Is it possible to germinate a broken branch?

A twig, accidentally slammed, may well give root. But only if the escape:

  • not too young;
  • not subject to rotting;
  • It has more 3-leaves;
  • there is a kidney;
  • It is in a timely manner in Korniner or another activator.

The broken twig is released from excess foliage, make a slant cut and placed in a container with an activator.

Foto-20-10.

Care for young sprouts - watering, lighting and temperature regime

Ficus loves good lighting, but not straight rays, but a bright scattered light. Therefore, it is more expedient to put on the windowsill, but in a darkened place. In dark places it is also not recommended, since the shoots will begin to branch in one direction, stretching into the light source, the leaves will decrease sharply in the amount, will become faded and unrelated.

Well the plant develops at a temperature of from 18 to 26 seconds. If the degree starts to raise the leaves will be saved. To avoid it - it is necessary to spray and wip the leaves with a wet cloth. If the flower is irrigated with water with the addition of milk, then the leaves will be shiny, glossy.

Watering a young sprout should be regular - every 3-4 days. In the summer, it is not necessary to withstand such an interval, but to water as the soil. In winter, watering is reduced to 1 time per week.

It is necessary to feed the flower from March to October, with intensive growth and the development of the crown - 4 times a month. In the summer it is necessary every 7-10 days alternating mineral and organic additives. When transplanting should be thoroughly filing the plant.

While watching the video, you will learn about the reproduction of the ficus sheet.

Thus, the reproduction of the ficus is a fascinating occupation. The reproduction of steppes is possible in several ways, but the sprout is best for rooting with a sheet. Grow and care so simple - the main thing, desire.

How to root ficus rubbing

The main rules have already been considered in the article. It remains to collect them and systematize.

Showing Chenkov

In the propagation of the fragment of the rubber cutting, you can pre-dunk in the stimulator solution. They must spend there no more than a day.

Before rooting:

  • remove milky juice from sections;
  • remove the leaves from the sections that will be in water or substrate;
  • the remaining - shorten or turn the tube;
  • The cuttings taken from the old branches are damaged at the bottom - make deep, penetrating through the bore, but not affecting wood, cuts;
  • It is desirable, but it is not necessary to process them with a stimulant of root formation.

In the reproduction of rubbing ficuses in water, the liquid does not change, and as they are evaporated.

For rooting, you can take substrates:

  • peat with sand (1: 1);
  • Perlite - it is often used after disinfection;
  • Vermikulitis - decomposes for six months, it must be considered;
  • Clean coarse sand.

To accelerate the development of the roots, a layer of fertile soil is poured onto the bottom of the seaside tank. The sucking processes will reach it in search of food.

Landing:

  • depth - minimum 3-4 cm;
  • underground should be a knot with the kidney;
  • The leaf should not be checked, the bottom of the cherry is possible.

How to care for a plant after the procedure?

  • Lighting . Ficus a lover of scattered light, so he does not tolerate the straight sun rays. Experienced flower products recommend to choose the western or eastern part of the apartment for the location of the plant.
  • Temperature . Comfortable conditions for the flower is the room in which the temperature is maintained + 20-25 degrees. In the winter time of the year, the thermometer should not be descended below +15, this can lead the ficus to death.
  • Humidity . Moisturize air with a spray gun. As for the winter, you can do the usual rubbing of the leaves with a damp cloth. Water procedures must be made exclusively in the water. Bear a flower from drafts.
  • Podkord . Feed the flower is needed at least two times a month, during the period of active growth. To do this, add complex feeding in the liquid state. It is important that in its composition was nitrogen.
  • Watering . Soil moisturizing is necessary as the upper layer drying. In winter, the ficus watered once every 7 days, and in hot time - 3-4 times during this period.

In order for the ficus to feel comfortable at home, it is necessary for the right care and certain knowledge of the host about the intricacies of the flower. However, the ficus can successfully grow in public places. The main thing is that the flower develops correctly, it is necessary to maintain the conditions for the content of the soil, to produce moderate watering and introduce timely feeding.

How to pinch Ficus

The ficus vaccination will be successful if they pinitate the crown on the grained plant using disinfected tools: alcohol or hydrogen peroxide. The sharper blade, the easier it is to pinch the branches. For example, the flower reached the desired height, but the upper escape is too thin.

It is enough to make a straight incision at the top of the process. The crown in a mature plant form a slanting cut over the kidney over 8 cm from the sheet. With a single-sided branching, Kerbovka will help - incisive bark over the kidney for stimulating shoots, under branches - for slowing down and weakening growth. Upon completion of the procedure, the plant provides proper care.

If the ficus is a transplant and pulling, it moved well, a new sprout will appear soon - the basis for interesting ideas to decorate the interior.

Care after landing

After rooting the ficus in a pot with a soil, he needed light, but to leave another weak plant under the right rays of the sun can not. The windowsill leaving the south side is suitable for growth, but there is a flower there is shading in the form of blinds or curtains.

Pruning and rooting new plants are usually carried out in spring - this is the best time, as the light day gradually increases. If the ficus is reproduced in the fall, after transplanting to the ground it will need phytolampa for additional lighting in winter.

How to root ficus

Sources

  • https://greensotka.ru/sukkulenty/kak-razmnozhit-fikus.html.
  • https://kursi-floristiki.ru/recepty/kak-razmnozhat-fikus.html
  • https://vashcvetok.ru/vyrashhivanie/fikus-bendzhamina-razmnozheniye.
  • https://stroy-podskazka.ru/fikusy/razmnozhenie-cherenkami/
  • https://floriums.ru/kak-ukorenit-fikus.
  • https://vashcvetok.ru/vyrashhivanie/razmnozheniye-fikusa-elastica.
  • https://kaktys.club/sovety-novichkam/razmnozhenie/fikusa-kauchukonosnogo.
  • https://sadovnikam.ru/448141a-kak-razmnojit-fikus-sposobyi-instruktsii-i-rekomendatsii.
  • https://plodogorod.com/cvety/komnatnye-rasteniya/razmnozhenie-fikusa-listom.html
  • https://selo.guru/rastenievodstvo/dekorativnolistvennye/derevjya/fikus/uhod-f/razmnozheniyu.html
  • https://ufermer.com/komnatnye-rasteniya/fikus/kak-razmnozhit.html
  • https://pocvetam.ru/poleznaya-infirmatsiya/sovety/kak-razmnozit-fikus.html
  • https://udobreniya.net/kak-razmnozhit-fikus/

[Collapse]

See also:

  • DRATSEN Sander or room bamboo - Tree of happinessDRATSEN Sander or room bamboo - Tree of happiness Room bamboo or sander's draouser is increasingly appearing on the tables in the office of the house on the window sill, it is easy to find in any flower [...]
  • Options for the correct dollar tree transplant: Earth quality and selection of capacityOptions for the correct dollar tree transplant: Earth quality and selection of capacity A look at a flower from a party. The tree is a neat bush with original leaves that are covered with a thin layer [...]
  • Flower Women's Happiness: Home Care Behind the Room Plant, how to transplant, water and how to fertilizeFlower Women's Happiness: Home Care Behind the Room Plant, how to transplant, water and how to fertilize Botanical characteristicsPatilum (Spathiphyllum) belongs to the family of aroid and is a herby perennial. IN […]
  • Hibiscus Swamp (Herbal) - landing, care, cultivation, featuresHibiscus Swamp (Herbal) - landing, care, cultivation, features One of the most common types of Malvov is a hibiscus - a swamp. It has a beautiful flower with pink, purple or terracotta [...]
  • Hibicius (Chinese Rose) - Causes of Yellowing LeafHibicius (Chinese Rose) - Causes of Yellowing Leaf Chinese Rose, Love Tree, Evergreen Plant, who gives us their fruits, bright widely opened terry roses, which are unusually [...]
  • Zissus bribant. Room grapes. Care, cultivationZissus bribant. Room grapes. Care, cultivation Cissus (room grapes) - refers to the genus of plants from the grapes family (Vitaceae). Homeland are Australia, Africa, South [...]

[Total: 0Middle: 0/five]

Добавить комментарий