Look at the master class and you will learn how to evan a wonderful rose from beads.
Look at the master class and you will learn how to evan a wonderful rose from beads.
To work, we will need:
- Czech cabin or Chinese ~ 40 grams (for roses) and 10 grams (for leaves) (colors depend on your imagination);
- Wire 0.3 mm;
- Wire 0.4 mm;
- Herberic wire 0.8 mm and 1.6 mm for axis;
- Threads Moulin for winding;
- Rights ordinary for assembly;
- Floral (TEYP) tape;
- Pliers and nippers for wire;
- Glue moment;
- Spinner for beading
Rose consists of the following elements
4 rows of petals (round top, round bottom): 1 row - 2-3 petals - 1.5 cm beads on the axis - 5 pairs of Doug2 row - 3 petals - 1.5 cm beads on the axis - 6 pairs of Doug3 row - 4 petals - 1, 5 cm beads on the axis - 7 pairs of Doug4 row - 5 petals - 1.5 cm beads on the axis - 8 pairs of arc 5 Chasselistic (acute top, sharp bottom) - 1.5 cm beads on the axis - 1 pair of arc 3 leaves (sharp, sharp or round bottom) - 1.1 cm beads on the axis - 4 pairs of arc 3 leaves (sharp, sharp or round bottom) - 1.5 cm beads on the axis - 4 pairs of arc
Petals and leaves for roses weaving french weaving technique. How to weave the petals to this technique in the section "Beading for beginners". The base for weaving from the wire is 0.3 mm or 0.4 mm. Short wire - axis, long - working. Pluckle roses rubbing - round top, round bottom.
We recruit beads on the working and axial wire.
Beads on the working wire must be under the beading axial wire. Fix (make one turn) working wire on axial perpendicular to each other.
We continue to fix the work wire required number of rows.
Cut the axial wire from above, leaving the tip of ~ 2-3 mm, bend it.
We flash the petal.
For this rose, we need to soar the following amount Lepalsy :
Chasselistic - 5 pieces
The technique of French weave is a sharp top, acute bottom (fix working wire on axial, not perpendicular, and at an angle of 45 degrees).
Leaves - 3 small and 3 large
Wash similarly to chasoleistic.
On the germing wire with a diameter of 0.8 mm, we attach three small sheets (threads of Muline or Floristic tape).
In the same way, we collect the second branch of the leaves of three leaflets of large size. Leaves collected.
We make three loops of 7 biserin each (you can make two such blanks so that the middleness is more lush). We attach them to the rod and consistently tying 1, 2, 3 and 4 rows of rose petals. Next, fasten 5 cups.
Watch the rod threads Moulin down. At a distance of 5-7 cm from the flower, the branch with small leaves is dripped, at a distance of 2-3 cm, the second branch of the leaves is brapping from it. Watching threads to the required length. Fix the drop of glue ending. Rose can be placed in a pot or in a vase.
Congratulations! Our rose is ready!
I hope that you liked the master class. I wish you a pleasant creativity!
Watch a video lesson "Rose from beads for beginners" on this page.
With love for you and creativity, Elena Kazakova.
How to make a rose from beads: Mater-class for beginners
For diligence and art there is nothing impracticable.
Beadwork is a popular view of a needlework, in which various decorations, toys and other volume compositions are created from ordinary beads and wire. Roses made on this technology look spectacularly and can decorate any interior or become a good gift.
Big Rose Bead
Beginner needlewomen can easily master the weaving of roses from beads on a master class with a photo. To create a flower you need to cook:
- Pink and green beads;
- wire with a diameter of 0.3-0.5 mm;
- Threads Moulin or Tape Rent of Green Color;
- Wooden skeletal;
- PVA glue.
The process of creating roses time-consuming and may take more than one day. It consists of several stages:
- creating rose petals;
- Weaving Chasselistic (Basics of Boot);
- creating leaves;
- making stem;
- The assembly stage of the main details.
Scheme of weaving bud
To create a large rose, it is necessary to make 11 petals: 8 large, 3 small ones. Weaving scheme is as follows:
- Measure the wire with a length of about 30 cm.
- Form the loop so that the beads do not slip down when working.
- For a short part of the base, the gross 8 beads.
- On most of the wires, start to ride 81-85 bispers, make them three turns around the short part.
- To secure the ends of the wire, you need to stretch through the average 3 beads.
- Slotto on such a scheme 3 petal.
- Then measure 50 cm wire and repeat all actions, and do not make 3 turns, and 5 by increasing the number of beads on the long part of the base.
- So prepare 8 large petals.
- Each petal give a slightly curved shape.
How to weave the petals on a plasticine base
If the previous type of weaving seems difficult, you can make petals on another scheme using plasticine:
- Flames are blind from plasticine, on the form of roses resembling rose petals.
- Lubricate Vaseline forms.
- Get the beads on the thread, put on the form.
- Above the petals with a transparent varnish.
- After the varnish is dry, carefully remove the petal.
- Remove petroleum vat.
- The inner part of the workpiece is also lacquered.
- So do all parts of bud.
To create a rose base, it is necessary to make 5 cups:
- Take 20 cm wire, make a loop.
- Lisens 5 beery to a short part.
- Grind 30-40 beads on the long part, take 2 turn around the axis.
- Looks 4 beads on the top tip of the wire.
- Fix the end of the wire, stretching it through the middle and twisting below.
- All CHASELISTICS Make the same way.
Leaves from bead
For the foundation it is necessary to weave 6 leaves:
- Take 30 cm wire.
- Make a loop.
- For a short basis, take 7 beads.
- For a long base, grind 80-90 beads. Make 3 turns around the axis, fasten the ends.
- By such a scheme, gloss up all the leaves, combine them in the twigs of 3 pieces.
When all the elements are ready, you can start the rose assembly:
- On the wooden skeleton, screw first small, then large buton petals.
- On the bottom of the bud fix the cups.
- Screw to a sprig stalk with flower leaves. It is better to retreat at different lengths - so twigs will look natural.
- Decorate the stem threads of the green moulin. Please note that the founding of the leaves is necessary.
Little bead roses
Small flower flowers can be used to decorate pins, brooch, rubber bands.
Prepare for work:
- wire 0.3 mm diameter;
- nippers or scissors;
- beads of two colors;
A small rose of beads for beginners woves on the following scheme:
- Load 9 beery on the wire.
- Make a loop, fix the ends of the wire, twisting them in 2-3 turns.
- On the same wire, make a number of 2 of the same arcs.
- At the tip of the base, type seven beery.
- Grind wire through the middle arc bead.
- Then add 2 more beads, the edge of the wire to sell through the second arc.
- Jump more beads and thread the tip of the base through the middle of the extreme arc.
- Add 7 more beads on the wire and fix its edge at the bottom of the petal.
- According to such a scheme, gossip 5-7 petals.
- Separately type 14 beads.
- Twist them with each other. It will be a chashelistic.
- From the petals, collect a bud, downstairs lock the cup.
Roses in the pot
Lush bush rose will decorate the interior of any living room. To create a bush, you will need:
- Yellow beads for bud;
- green beads;
- scissors or tweeters;
- Green threads Moulin;
- Ceramzitic drainage.
Scheme of roses from beads in a pot:
- For 30 cm wire to turn 1 green bead, lower it to the center.
- Hang 2 more beads, passing them through both the wire tip and tightening.
- In the same way of weaving 4 rows of 3, 4, 3 and 2 beads in each.
- To fix the ends of the working thread, it is necessary to twist the node.
- Make 6 such cups.
- Similarly, weave the petals. A 60 cm long to make 8 rows of 1, 2, 4, 6, 8, 10, 12, 14, 14 yellow beads.
- 9th row - edging. For each end of the wire, it is necessary to ride 9 beads, stretch them through 1 row.
- Tighten the ends into the knot. Weave 5 petals, for each of which you need to re-sigh and cut off the wire.
- Also weave 4 large rose petals in 9 rows.
- Make 11 leaves consisting of 11 rows of 1, 2, 3, 4, 5, 6, 6, 5, 4, 3, 2, 1 green beads.
- Rose petals to argue arc.
- For the assembly on the skewer to combine first small, then large petals.
- From the bottom to close the bout of the cups.
- Over the entire length of the stem evenly distribute large leaves.
- Complete stem threads Moulin.
- Similarly make other roses.
- From the foam cut the circle, slightly less than the diameter of the pot.
- Insert a foam in a pot, stick into it roses.
- Top to fall asleep drainage.
M. K. How to make a rose from beads? Easily!!!Found in the text error? Highlight it, press Ctrl + Enter and we will fix everything!
Making a variety of colors from beads is a popular kind of creativity, which are addicted to many needlewomen. The rose of beads is no different from the present and is not inferior on beauty, but much longer. Using the latest techniques of twisting, you can independently perform extraordinary gifts for loved ones.
Preparation for work
The process of weaving requires adhesion, great patience, minimal skills and knowledge. Ideally need a table covered with fleece cloth. Due to its anti-slip properties, small details will not roll from the surface. Work with beads creates a greater load on sight.
It is important to take care of good lighting in the workplace.
- Beads of several shades, depending on the fantasy;
- Box with low sidelights lined with white web for placement of material;
- Thin line for creating a base;
- wire 0.3 mm for the formation of floral elements;
- Silk threads for assembly;
- wire 4-6 mm for the design of the stem;
- Stationery Scotch;
- thread moulin;
- sewing needle;
- Floral paper.
- Wire pliers;
The French technology for performing roses from bead implies at the first stage of the molding of bud. Details for petals are created according to the parallel weaving scheme:
At the first stage, Beadin is planted on the wire and moves to the middle. Subsequent rows will include 2, 4, 6, 8, 10 and 11 beads. Next, on the ends from the opposite sides, the number of beads equal to the number of rows is rolled.
Accordingly, the wires of the wire must be bent to the starting point and fasten the harness. Such blanks must be made by the number of flower petals. After the end of weaving, the petals should be given a naturalistic appearance.
At the next stage, sewers are made. French weaving technology also applies, but the number of beads in the ranks is created according to the following scheme: 1, 2, 4 to 3 pcs. Beads, 2, 1.
For weaving a large rose, six sewers are enough. You can make a smaller amount or, on the contrary, a larger number of billets. It is important that when assembling they are at the same distance relative to each other.
Leafs for roses
The branches and leaves are created from floral tape, beads, tape and wire 0.3 mm. Each leaf consists of five parts. Each of the materials is made in the form of a diamond method by parallel weaving. It is important to adhere to the scheme where the first row consists of one beery, and a wide range of five.
Of the 3-bisers are created 2 rows; 3rd row - 4 pcs .; 4th - 6 pcs .; 5th - 4 pcs .; 6th - 2 pcs. 7th - 1 pc.
Then the ends of the copper wire twist.
A similar method should weave 5 leaves. The ends of three leaves twist together, forming the stem, to which the remaining two sheets are added. Next, the base of the branches is turned on the floral ribbon.
Creating rose petals with plasticine
Sometimes professional wizards advise using a plasticine base for performing roses from beads for beginners. In this case, it will be necessary to cut a special blank, similar to the form of plant petal. In order to avoid sticking plasticine on the beads, the surface of the plasticine base is recommended to lubricate the vaseline.
Then the beads must be driven onto the silk thread and decompose on the surface of the base from plasticine. To fix the workpiece with the help of ordinary varnish. Next, the beads are separated from plasticine and removed with warm water layer of vaseline.
At the final stage of creation of petals, a layer of varnish on the second side is applied. It will only be to assemble the details of the plants based on the general plan. For roses, it will be necessary to make 10 identical petals.
Build a flower
Buton petals give an arcuate form. On wire 4 mm wound the details of the flower. Pink bud is starting to mold from small petals. A sewing needle sewed in color is inserted and the base of the bud is stitched. It is necessary to impart the strength of the overall design. The top of the rose is attached to the stalk with the help of silk threads and scotch. Chassels are placed around the petals.
The resulting design is fixed with Moulin. To disguise the wire, the flower stem is wrapped with a green scotch. Deeping 1 cm from finished cups, the first twig with leaves is fixed. The second twig is located at a distance of 0.5 cm. The end is fixed by the drop of the stationery glue. Rose ready!
Pink bush in a pot
After reading the master class on making roses from beads, you can start creating your own masterpieces.
It will take:
- Aluminum wire - 0.8 mm;
- Leske - 0.3 mm;
- Beads of different shades.
One end of the aluminum wire is put on 10 pieces of beery, then the wire segments are twisted by passage, leaving a small leg in 1, 5 cm. Similarly, 4 flat loops are created.
10 pieces of beads are put on one of the wire segments, the fishing line is loaded through the upper bead of the closestly located loop. 3 bispers are placed on the made form, the wire passes through the top of the second loop.
Important: 3 pcs should be cleared between any loop. Beads. At the end of the design of the last part, beautiful border of 10 pcs is made. Bead. Passatias twist the ends of the wire. A molded petal must be given an arched shape.
Thus, 4 petals consisting of 5 loops and 6 pink petals consisting of 4 loops should be made. At the end of the curved blanks, a bud is formed. For greater naturalness, the external parts of the plant can be slightly disclosed.
26 biserin is rolled on aluminum wire, then the ends of the passage are twisted into three turns, forming a bulk loop. Of the resulting tails, a circle is made from below to 8 pcs. Beads on each. Next ends are twisted again. Similarly, you need to make 5 parts. To perform 6 loops on one of the segments of aluminum wire 8 beads and stretch them to the end of the top loop of the first cup.
Silver wire turns around around the base of a large circle. On the free ends of the fishing line, 8 pieces of beads are bubbling for the production of lower circle. Connect the ends of the wire and the preferred form of chasoleistic.
Leaves and twigs
The leaves are manufactured using the main axis of 4 pieces of bisper and three arched arcs. Of 3 leaves, twisted with each other, a branch is formed. If there are questions, how to make a rose from beads, you can read the tutorial for the needlewomen.
Build a flower
A segment of a construction cable is taken, and a bud is attached to it. Next, sewers are put on it, they are binding to silk threads, combined with the total color scheme. Stem and branches are recommended to crush green scotch.
For a beautiful design of a bush, you can make a fleece branch. To do this, 5 multi-colored beharsin are located in the center of the wire segment. Wire ends twisted in a characteristic tail. 5 cm. At all ends of the tail, the loop of 5 beads is repeated. At the end of the formation of the side circle, the ends of the fishing line are joined to the branch.
The technique is repeated until the segment is over. For one bush, Flearder is molded from 3 to 5 parts with hinges. In general, the pink bush is constructed from 7-9 commensurate roses and phlegondraza.
Made flowers are attached to each other, put in a pot, filling it with a diverse cement.
Beaded floristics - time-consuming, but the favorite creativity of the needlewoman. Special roses in it occupy a special place - beads allows you to embody the most fantastic ideas on the beauty.
Photo of roses from beads
Weaving from beads for many needlewomen not only favorite occupation, but also the ability to create an incredible beauty of the product. Rose from the beads in this regard is a real dream for lovers of creativity, but on the way to its implementation there is a lack of experience or proper knowledge.
The Internet often meets the question of how to make a rose from beads with their own hands, but only real specialists can answer it. They advise not to despair, because even a beginner will be able to spread rosa from beads if there is a few important stages.
For the manufacture of large roses, it will be necessary: cutting and conventional beads 11 and 10 sizes, respectively, in the amount of 150 gr, 34 meters of metal wire with a thickness of 0.4 mm and 30 meters thick 0.3 mm (preferably the same color as beads), about 10 Copper wire meters, three cuts of rigid aluminum wire or steel for the base (you can choose iron knitting needles), threads in the color of beads (about 10 meters), sewing threads, a vase or a pot for small colors (beautiful bowl), gypsum, Ordinary glue and foil.
The tools will need nippers, scissors, pliers and round-rolls, as well as a couple of brushes. This is all that include simple rose weaving schemes for beginners, which is presented below.
The first circle of petals
There are many options for weaving roses from beads, but the most popular technique for this case is a circular (French).
At the first stage, 5 petals are manufactured. First you need to dial 0.4 mm beads with a thickness of 0.4 mm, without cutting off the coil.
The length of the bead thread should be 1-2 meters in order to continue to work without being distracted by a set of beads. It can be done both manually and with the help of a bead master. It will be the main working wire.
After that, the cut of the wire of the same thickness is taken in length of 10 cm, on which five beads are recruited. This segment is the axis for the future petal, so it is fixed to it the end of the working wire from the previous stage. The working wire is simply wrapped around the axis of the segment, while leaving the edge of 4 cm.
As a result, 5 beerin turn out to be in the middle, and the working wire is wrapped around them, fixing on the one hand, then on the other. Each of the three necessary petals will have five arc around the axis on both sides.
The remainder of the wire from the top can be cut off, but at the same time you need to leave 2-3 mm, which will bend inside, but you can also skip in a few bisper or the entire last arc.
The second option is more complicated, but excludes the risk that the petal will break. This is the principle of circular weaving, which will be used throughout the workflow.
Finished petals are inserted into each other, imitating a real rose, and to the remnants of the wire below it is necessary to take a cut of wire 5 mm thick and wind all the threads in the color of the stem. The basis for roses is ready.
Second round of petals
In the photo of roses from beads it is clear that it includes five circles of petals. The second round is performed in the same way as the first, but the number of arcs will be 9 and the last of them are performed not perpendicular to the axis, but under an acute petal. This allows you to create acute type petals.
In the process of weaving, you need to pay attention to how the working wire lies. In the first 4 arcs it will occur from above (on the wire axis), and in the five subsequent, it occurs from below, which gives an invalid loop. It is important not to forget about this so that the petal turns out exactly how it requires the appearance of the future rose.
After the manufacture of all the petals, they must be bent inward so that the upper tip speaks a little, and after alternately climb the rose. It must be done in such a way that the curved tips performed over the petals of the first circle, creating a bud.
Third circle of petals
Ideas and instructions for making roses from beads many and all of them have their own characteristics, including this scheme. The third piece of petals is made of 10 arcs and 4 beads on the main axis. The upper part involves 5 rows of facial and 5, respectively, the involves mentioned above.
This type of petals should have an acute angle and a cup-shaped form, which is attached to hand. The upper part must be bent so that it looks at the top.
The finished petals are applied to the bud and are primed up with threads for strength, while you can not touch the previous circles of petals and violate the general view of the bud.
Fourth Circle of Lepals
For the manufacture of the fourth circle of petals, and there will be 4, there will be two axes and one working wire that is fixed around two segments. 2 bispers are recruited on the right axis, and on the left 1, after which the first arc is created by the working wire.
Before making a second arc, you will have to dial one bisper on each axis. Total axes at the fourth stage Master class on the manufacture of roses from beads will be 13 laps (8 facial and 5 irons).
The lower part is made round, and the upper can be both acute and any other form. The remains of the wire at the top of two axes are cleaned in the same way as in the first round of petals.
Ready petals need to be given a form: bend the lower part inside and pull out the top outward, after which it is to climb into the rest of the rose.
Fifth round of petals
The fifth circle of petals includes 4 petals and woves on three axes. They are absorbed from 3 to 1 bisper with the right to left, but after the first circle on the middle axis will have to score another bead. Before the third round of the arc must be dialing 1 bisper to extreme axes, and everything should turn out 15 arcs (8 facial and 7 irons).
The lower part needs to be done round, and the top shape does not matter much. At the end of weaving, petals give a cup-shaped form and alternately primed to the base of the future rose with threads.
At the last stage, it is necessary to secure the position of the petals with glue, preferably acrylic. It is applied along a small drop in places of contact with the petals, so that in the future they are not broken under the weight of their own weight.
In addition to rose, you can weave a pair of buds, the process of weaving which includes the first two stages, which are listed above. You can make the second round of buton petals to do both sharp and round.
Various ideas and designs for the manufacture of roses from beads can include chashelistic, and not.
For roses, 5 cups will also need to be absorbed. To do this, take a cut for the axis and the working wire with another color of beads. To begin with, 6 cm beads are recruited on axis, which are wrapped in two pairs of arc.
The third arc will be a bit different because it needs to be skipped after 1 cm bisperin of the top row, after which it is necessary to deploy a working thread and make the second such arc.
On the other hand, you also have two similar arcs. A cup is primed by threads to rose and bootons, but in the second case, not 5 pieces, but 4.
The leaves are manufactured in the same way as round petals. In total, there must be 18 pieces for the composition, and for one rose, the amount is selected at its own discretion.
Scheme of leaves: 7 biserin on the axis and 11 arcs on each side (large), 7 bisper based on and 9 arcs on both sides (small). The leaves are collected three pieces in the twig, after which the entire composition of roses and buds is prepared. It is necessary to collect it by winding every part of the threads so that nothing hang out and all the elements kept tight.
To give a complete view, it is necessary to plant a rose in a pot or a bowl on plaster.
Photo of roses from beads
Wicker flowers and trees enjoy great popularity among handmade connoisseurs. The work of such a plan will decorate any corner in the room. Charming roses from beads are easy to assemble, but as a gift to a close person they will be much brighter of living samples. The unfavorable figure will delight the beauty of many years. All sorts of potted decorations or whole bouquets under the power of anyone who wants to try themselves in creativity.
Accessibility and simplicity
Regardless of age and experience in his own execution, it is possible to understand all the subtleties due to the rose of beads with a weaving scheme with step-by-step photos. For the first steps on the way to success, you will need preparation. The main components are unlikely to find on the shelves or in the storage room it is necessary to buy in specialized stores.
It should be given preference to more expensive products, cheap options are characterized by quality, in one bag will come across the curves of the inappropriate size, so the extra forces will go to the revision and sorting of each component.
Go to practice
To figure out how to make a rose from a bead with your own hands, do not have to finish the courses or to own special skills. Ability to enhance and desire is enough. All sorts of master classes and schemes are good tips on the way to the successful completion of conceived actions. Prepare the following:
- Czech material of several shades.
- The top will require an average of 140 grams, and leaves 80.
- Thin wire for rolling.
- Floral tape.
- Polyurethane glue transparent texture.
Beautiful rose of beads for beginners should turn out great and chic. The height each determines for itself personally, it will depend on the rod used in the masterpiece. Collecting and decomposing in a convenient way all components can be started at the initial stages of creativity.
Using French technique, the rose beading is first needed to create a bud. Each petal will require special attention to himself, and the final appearance is formed during the process.
The scheme is quite simple, making an axis from metal, you need to climb to it half a meter segment of the same diameter. Five beads to arrange inside and wrap them with eight arcs, forming a circle. In order to observe the correct shape of each workpiece, the leg unfolds 90 degrees.
Bouquet of beads
It will look like naturally, if you do not forget to correct each item in the next rows. Bending a leaf along its axis, it turns out to twist it in the right direction, the tip must reach out. It should not be neglected to neglect the shape of each workpiece, the final outlines of the entire product will depend on the unit components.
The last two rows on the scheme how to weave a similar flower marked with a white tint. Such a reception will distinguish the edges and this will give a certain effect with decorative decoration. The fourth stage involves the use of equipment on 2 axes, the work is complex and will require maximum care.
Important! Weaving roses from beads with practice will not be given difficult, and take a lot of time, but for the first time it is better to adhere to all the tips from the instruction.
Cooked fat harness is very useful now. From it gently form the stem, to which the finished petals of a small rose will be attached. It is important to monitor the sequence of rows and combine all the blanks into one whole lush bud. The previous part must be superimposed on the following.
The severity of each piece contributes to the fact that they will be removed a little down. In order for the design completely out of collapses, the use of glue will need, it is necessary to use it at the base of each row from the inside.
The top will not look like a finished rose without a cup of roses. Over its creation and should be done at this stage. I cut off approximately 75 centimeters of the wire, making the axis, you can start the roller. In order for all the measurements to be made to the eye, it is better to use a ruler or tape measure, a gear sheet technique is easier when compliance with each small length.
Leafs for stem
The spectacular bush rose from beads can be distinguished by the pointed tips of each element of the green design of the stem. It is these trifles that make a masterpiece truly perfect. Select a model and appearance. Everyone can personally, guided by its preferences, but the approach to a natural state is able to assign a fabulous opportunity to amaze and delight.
I wrapped the basis of the floral ribbon, it will be possible not only to hide the shiny metal features of the material, but also give the rose bubber from the bead of elegance and attractiveness. Such manipulations better do with all the elements of the stem after each petal is in its place.
When all the details merged together, the one-piece image of a rose of beads in a pot or in the form of a bouquet will appear in complete glory. Several different crafts collected into the composition almost impossible to distinguish from real plants, and most importantly, their beauty and charm will be happy to please forever. Eutful abilities will give infinite time to admire them. Any quantity will look just gorgeous, and the costs and forces will not go so much, the process cannot be called routine or incomprehensible, everything is quite simple and fulfilled.
Beatting with a black rose made in a beadwork technique, it will not be possible to avoid the creation of a person who is interested in it will be hard to restrain. Native and close people will definitely praise and sincerely be happy, noticing a similar thing on the windowsill or in the hallway.
Decoration for home
Beautiful openwork roses woven from small beads is easy to diversify the area for relaxing in the apartment. In the winter season, such charms will remind of warm spring days. Forms for gold will be able to emphasize the interior in the ancient style or give, special attention to the place in which it is worth it. Crafts in the basket look at home and, undoubtedly, assume comfort in those rooms where there is not enough light or a large journey of things.
Flowers from logging
Handicraft using bright shades Many are compared with puzzles or mosaic, the process is so fascinated that the time spent behind it flies unnoticed. If at home becomes boring, you should immediately get a box with blanks, you can invite friends and go to the process together, the mass of positive emotions is provided.
Present a favorite person
It is no secret that women adore flowers, the brooch rose from the bead will decorate the clothes even a business woman leading an active lifestyle. Thinking about a gift for a girlfriend, you should not learn the option of my own assembly, such things are stored for years and tremble. In each model in a separate bar, the author's soul was introduced, these features are not measured by money, any bought souvenir in the notes is not suitable for a product made by their own hands.
Each mother will be delighted with the glass-shaped buds collected by one of the children, will be this birthday or the World Women's Day it does not matter, attention and care will be rated full. Men may think that work with such small materials is complex and impossible for them. But this is not the case, maybe there will be a little more time, but construct one flower exactly. It is worth creating it on the meter leg and add more green leaflets, the stem is made of thick wire, so the coarse force does not hurt, and the finished design will acquire halanery and effect.
More than an adult age of children, crafts from paper and appliqué are not strongly attracted, beading will come to the rescue, parents can offer together to recreate various options. It is important to interest the child and try in advance to gather a bouquet for a class teacher, it will be a bulk beautiful composition containing several types of vegetation.
Invent an interesting performance of petals from beads to see, their classmates were very surprised, and the teacher will feel the caring from the class, for which they are fixed. It is possible that the most interesting conversation will be involved in the stages of creating with peers, there will be like-minded people in these classes, communication will lead to the confidence relations and creating friendship at a young age.
Cute and original roses from beads are becoming more and more popular, in the dwelling decor such things are simply indispensable, and use in clothing emphasizes the individuality of the image. Sometime to get several bags of multi-colored slices of rainbow, it was difficult for them for them, people specially leaving abroad, now all materials are available on a wide sale.
Needlework stores offer a large range of shades and manufacturers, prices are so loyal that everyone picks up the ones to him for his pocket. Having a great desire and craving for the art of obstacles on the way already invisible, painstaking models only temper the spirit and help to understand that everything is possible if you try.
The experience gained must be useful in the future, the needlework has always been appreciated, and the time does not stand still. Bright images with bead elements have long been used in the design of bags or T-shirts, the ability to this lesson will be useful in updating our own wardrobe, and will give a new life forgotten things.
Beautiful bead roses: Photo Examples of the best works
Please make repost
Much popularity has various products from jewelry to the most beautiful fakes. It is understandable, it is cheap, beautiful and convenient. Beads are used to decorate clothes or manufacture of fine work. Making roses is no exception. On the contrary, this kind of fake recently began to gain popularity.
Pluses of making roses from beads
Now there are more people with intolerance to flower pollen, that is, with allergies. Extremely uncomfortable on holidays, the other day of birth, with the gift of flowers. If a person actually loves these wonderful creatures, like roses, it will not be able to have them on his desktop or on the windowsill.
Also various products, not only a rose, you can decorate your room. Make decorations. And roses from beads will open with any guest a sophisticated character of the owner or hostess. Such decorations will serve home for a long time. For them, it is not necessary to care and they will not be spilled by parasites, like a web tick.
Of course, such a product can be bought, and not spend your personal time for making. But only imagine joy and pride for the decoration made with your own hands. And it will come out much cheaper due to the lack of overpayment for someone else's time. And in order to surprise friends and acquaintances, it is enough to follow a step-by-step photo with a rose weaving scheme from beads.
Making something, you act as creators. And creators need tools for work:
- Beads - filling. Choose a bead with the mind of the color, it will determine the nature of the work and the meaning invested.
- Wire - the framework to which beads will be driven. She keeps shape. Wire varies in thickness and strength. Choose in accordance with the opening of the selected bead. It is important that the wire can be diluted at least two times in one bisery.
- Pliers are needed to cut the wire. Wire can be cut with scissors, but after time they will come to the uniformity.
- Leske for softer and dense work. It acts as the basis for beads.
- Thread for very complex works that require long painstaking work and patience.
- Scissors for circumcision thread.
- Needle for permeating thread through beads.
- Matches or lighter to guide the fishing line at the end of the work stages or work itself.
- Patience is the necessary quality for all needlewomen. Few who finish work to the end without patience.
- Desire is an action engine. While you do not want to do something, you will not succeed.
Ways to manufacture roses from beads
Novice and those who do not want to linger at this stage of decoration of space is suitable easiest way. Take the wire, pliers and beads. Cut the wire into several equal pieces, for example five.
Collect the beads to pieces in different numbers, start with a smaller and end with great, but so that everyone has the edges. Take all the pieces by the edges, having previously shifted the beads in the middle, grind in order to increase beads.
And twist the ends from different sides of all pieces, you have 2 twisted end. Fold them with each other and twist so that a piece with a smaller amount of beads was in the middle of the petal.
Create such several petals. Remember the magnitude of roses, so some petals will be less. It is better to make big tails to twist them into the stem.
To bring the rose to closely make a more realistic way, but green beads, leaves. Roll them together with the bud. Rose may be gentle, and maybe barbed. To create spines, take short parts of the wire and pass them into a common trunk. And then bring their edges.
There are various weaving techniques from beads. For example, for the manufacture of roses, you can use squares of squares. We will need a fishing line, scissors, matches or lighter and naturally beads.
The technique itself is easy to perform. Take the line a big length, ingested in it 4 beads and on one of them closed the edges. Next take on each mustache on one bisere and the third to close.
And do it so far do not complete the first row, then unfold weaving. Make it easy. Just closure not on the next central, but on the side beet. Deploy again.
Now for one side, lateral beads serve the side bispers of the first row. To expand or narrow the rows, you need to add or narrow squares on the sides.
Start from the top edge of the petal, gradually narrow. The remaining mustache will help to make all the petals together.
The law of Liar still acts the closer to the center of the petal, the less.
Many do not like to mess with a large number of petals, for this there is a response solution. Create one such big long petal. And tighten into the tube, lock the fishing line, selling it through the beads, allegedly stitched them. And from this it will be possible to lead the stem.
For experienced needlewomen, this is not a difficult job, but for beginners it is too painstaking work. For the manufacture of so clear work, it will take a thread, needle, beads, scissors and understanding of mosaic weaving.
You dial an odd amount of beads for the first row on the thread. Take a needle to the third bead from the end, tighten. You dial a new bead, make the needle on the fifth from the end. Repeat these actions to the end of the row.
Remember that it is possible to expand and narrow the rows by adding beads on the sides. Petals are stitched together.
This is a difficult job, but it is worth it. Such embroidery gives greater realistic product. Sometimes you can find roses weaving schemes from beads for this technique. Usually professionals are engaged.
Manifestation of fantasy
It is not necessary to do all the product in one and style, combine difficulty levels. Make fabric petals and leafles with wire stem. Petals in roses are gentle and soft, and the trunk is solid, capable of holding a bud.
For consumerism, create several buds. Some closed, open. And gossip everything into one big thick stalk with branches. Pose a rose in a pot by creating a layer from painted in the brown color of foam.
Decorate a rose. Having sowed it with stones and shells and drink an artificial butterfly on her.
Optional to do a standard rose. Non-phenomenon, which means it may not look standard. Multicolored, blue, black, any, rose must like. And to exactly not get confused, you can see the master classes of roses from beads.
Rose is a good decoration of the gift of allergic. In the case of making roses, choose the design for the color tastes of the recipient. Do not bother with smartness than the more beautiful item, the greater the chance that the person will leave her and make the main decoration of the house.
Start with small to go to more.